Results 1 to 9 of 9
Thread: New Member from AZ
-
08-28-2018 #1
Registered User
- Join Date
- Aug 2018
- Posts
- 15
New Member from AZ
New to this forum as of today. My project is restomod of 1970 Mach 1. Car started out mostly rust free, only rust found so far is rust in the lower cowl panel. I am the third owner of the car. The original owner trashed the original 351C and transmission. I purchased from second owner in 2016. The car had sat for a long time, so interior had dryed and rotted. The first owner also ran the car into a tree or something in passenger front. So with so much no longer original to the car, I decided to build the best street car I can afford. Suspension is from Total Control Products with full length subframe up front. I will have a G-poly 4-link at the back, coil over shocks all round. Power is from 2nd gen Coyote and 6R80 AT from 2017 GT donor. I am here to get more info and ideas from others that have swapped a Coyote into a first gen Mustang. I am looking forward to reading about the members builds on this site.
Alan
-
08-28-2018 #2
Registered User
- Join Date
- Aug 2010
- Location
- Seattle area
- Posts
- 360
Well welcome aboard !
08-29-2018 #3
Registered User
- Join Date
- Jul 2013
- Location
- Gilbert, AZ
- Posts
- 934
Welcome! Look forward to the build, I love the 69-70 Mach 1's and Boss's.
Josh Campbell- Pushing the limits of my HOA since 2011
71 Firebird- 455, Ridetech front suspension. https://www.pro-touring.com/threads/...04#post1124504
67 Camaro RS/SS clone, Speedtech front suspension, coilovers, soon to get LT1/T56.
82 Z28- cheapie beater, soon to get a 406.
66 Mustang coupe- 393, T-5, sold. https://www.pro-touring.com/threads/...-Coupe-GT393-C
08-29-2018 #4
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,117
Welcome Alan!
Looking forward to your project.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
08-29-2018 #5
Registered User
- Join Date
- Nov 2002
- Location
- Georgetown,TX
- Posts
- 2,557
Sounds like a killer build, Alan. Looking forward to following its progress.
09-02-2018 #6
Registered User
- Join Date
- Aug 2007
- Location
- Jonesboro, Arkansas
- Posts
- 2,506
Yep, welcome! We love pictures..
Carl Wilson
1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.
09-02-2018 #7
Registered User
- Join Date
- Aug 2018
- Posts
- 15
Rather than post all my build pictures again, here is a link to my build thread on the Vintage Mustang Forum. Lots of pictures only a couple of weeks behind actual progress.
Originally Posted by minendrews68
https://forums.vintage-mustang.com/b...mod-build.html
09-02-2018 #8
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,117
Alan, Originally Posted by Boss5Oh
You Sir, are doing a fantastic job. It would be awesome if you started a build thread here. One tip, maybe make your images a little bigger. Something on the order of 1000 pixels wide.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
09-07-2018 #9
Registered User
- Join Date
- Jul 2007
- Location
- Phx AZ
- Posts
- 25
Welcome from north Phoenix.
Reply With Quote
