Making changes

[73-TYPE-LT-LS1]

With the cage going in next week, I thought it best to redo the rear suspension now to help tie things together. Here is what is planned:

Keeping the Martz shock / PHB mount.
Keeping the Martz LCA/UCA rear end brackets. Using the LCA holes on them for the rear of the bottom two bars.
Building a new cross brace for the front connection of the LCA .
Tieing the UCA front mount in to the main hoop on the roll cage.
Putting rear UCA mount on the top of the 9".
Keeping the PHB from the Martz kit.


What all is needed to determin 3-link mounting points?


Here is what I have figured out so far:
Rear end brackets are 29 3/4" apart (14 3/8" off center)
Height of rear axle is 12 3/4"
LCA rear mounting hole on rear end is 6" off the ground
Wheel base is 108"