Results 1 to 20 of 71
Threaded View
-
10-30-2017 #11
Starting The Transformation
- Join Date
- Aug 2014
- Posts
- 104
I designed a reinforcement plate in Solidworks for the back of the Crown Vic frame. The stamping is nasty, and I needed a good place to mount the bags.
Stamped frame as it sits.
Plate as it should look installed over the top. The plate is perimeter welded, and will be made out of .120 Steel.
Plate at 70% transparency to give an idea of where things line up. This is just a quick mock up, so not everything is perfect obviously.
This should make things look much better in the back of the truck. It will also make it very easy for the bags to bolt up in place.
-
Reply With Quote
