Results 1 to 2 of 2
Thread: Holley Hi Ram
-
07-03-2016 #1
Registered User
- Join Date
- Sep 2015
- Location
- Chino Hills, CA
- Posts
- 17
Holley Hi Ram
Hey Guys,
I am building my 55 chevy truck, TCI built the chassis for it and I am running an LS3, I am wanting to run Holleys 105mm Hi Ram Intake but am very unsure if it will fit under the hood. All I am working with right now is a bare chassis so don't really have much of a way to measure it. Any advice is greatly appreciated.
Thanks
JacobJacob B
Chino Hills, Ca
1955 Chevy 3100
-
07-28-2016 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,119
Jacob,
Originally Posted by Jacobb55
You need to have a dummy block installed into the chassis, then you can use the measurements provided by Holley for the Hi-Ram.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
