T-56 clutch problems.......

[Motorcitydak]

Hey guys, trying to get some help with the issues i'm having with my clutch setup, cannot get a pedal that I believe is as firm as it should be, especially since I picked a clutch that should be very firm. I have tried bleeding the system 3 different ways so far, vacuum, pressure and the ole two person method. After all of these I can watch the throw out bearing move maybe 1/4 inch? I guess there just has to be air in it somewhere but cannot seem to get it moving. Or maybe I have the wrong size master?

I can shift the trans just fine with the with the car off, engine running it refuses to go into gear with the clutch pedal pushed in. I can hear a slight change of noise but nothing else



For the details I have a tilton floor mount triple master pedal assembly, pretty sure a 5/8 bore master and using the remote reservoir, Viper slave cylinder and a 3 foot remote bleeder. The flywheel is new as is the clutch which is a McLeod unit but cannot remember the details about it