Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Apr 2013
      Location
      Knoxville, TN
      Posts
      95
      Country Flag: United States

      LS Pedal Assembly

      I am starting to gather parts for an LS swap and I was thinking about the wiring harness spefically the throttle pedal assembly. Does it matter which LS vehicle it comes out of? I ask because I found a LS equipped Tahoo at the local u-pull. I am not really interested in the motor because it looks like it lived in a severly dusty area. Its completely covered in dirt. I did not check and see if the throttle pedal is still there but I will go back if it maybe useable.

      1963 Chevrolet Corvair Pro-Touring Project
      1964 Chevrolet Corvair Coupe Rat Rod/ Patina Thing
      2012 Mazda 3 I Sport Sedan


    2. #2
      Join Date
      Oct 2014
      Posts
      16
      Country Flag: United States
      The way I understand it, it is not wise to mix and match pedals and engines. In my case, I have an LS2 from an 05 GTO i found a corvette pedal for 60$. When I ordered my harness from CBM Motorsports they said I have to have the GTO pedal.

    3. #3
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      Very few pedals or TAC modules intherchange in the pre 07 gen III motors.
      Always best to get everything from the same vehicle.

    4. #4
      Join Date
      Apr 2013
      Location
      Knoxville, TN
      Posts
      95
      Country Flag: United States
      Thanks for the info. You saved me a trip back to the yard.
      1963 Chevrolet Corvair Pro-Touring Project
      1964 Chevrolet Corvair Coupe Rat Rod/ Patina Thing
      2012 Mazda 3 I Sport Sedan




    Advertise on Pro-Touring.com