Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4

    Threaded View

    1. #4
      Join Date
      Feb 2013
      Posts
      37
      Country Flag: United States
      Bob,
      Sorry I'm slow to reply - I missed your post. My car isn't finished yet, so I can't give you feedback on how it will behave. I have set my ride height to offer about 4" of bump travel (from ride height) on the street, 2" on track (road course). I'm aiming for a firm, but not harsh ride. I'm also running a BBSS (Big bar/ soft spring) setup on this car, so those bars will lend a LOT of roll resistance on the street, leaving a lot of room for bump travel under load. I should have 1-1.5" of bump travel left at 0.8g of braking (a guess at street tire capability).

      If you're looking at 2" of bump travel for a street car, I very seriously doubt you'll be able to get away with a 110 lb/in wheel rate. You'd most likely be all over your bump stops, all the time. You'll probably have to go for ~ 100 CPM wheel frequency. That, however, is just a guess, with no #'s to back it up!



      If you're interested in running the numbers for your car, shoot me a PM - I'll get the data I need from you, and can run it through my program. I'd give you the spreadsheet, but I very seriously doubt anyone but me could read the damn thing!!

      Best of luck!
      -Matt





    Advertise on Pro-Touring.com