spindle ?

[Ron Sutton]

I was wondering if anybody is changing there spindle inclination on there spindles. If so what is the degree you have found that works best?

There are variables that I take into account ... like scrub radius & if we have any caster limitations.

If the scrub radius is already high ... and I can't get it down ... I don't want to make it worse by reducing the KPI. But if the scrub radius is decent, I'll lower the KPI on new spindles ... which allows us to run less aggressive camber.

I can't suggest a specific KPI number without knowing quite a bit about the car ... like scrub radius, caster, camber and front roll angle.