Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9

    Threaded View

    1. #1
      Join Date
      Nov 2006
      Location
      Calgary Ab
      Posts
      126
      Country Flag: Canada

      Chasing Annoying Vibration

      I've been chasing an annoying vibration on my '69 Chevelle for a long time now. I was completely convinced it was driveshaft angle related and just bought and installed a new aluminum driveshaft with front CV joint from the driveshaft shop and the vibe is still there! While chasing this I have replaced the big block with an LS3 so that eliminates the clutch and flywheel etc, replaced the tremec 5 speed with a 4l60e so that eliminates trans issues, replaced the driveshaft and am running 1º rear working angle and front cv to eliminate that, had the wheels/tires checked and rebalanced plus rear wheel pads cut down to eliminate the chamfer and ensure they are fully centering on the hub flange all with no effect. I think it's down to rear end/axle issues now. The vibe is a constant rythmic pulsing anytime I'm over about 70mph. Could a slightly bent axle cause that? It's a new moser 12 bolt with trutrack and 33 spine axles.

      Gary Morris

      1969 Chevelle
      TSP 418 LS3, North Texas Converter 4l80e
      Ridetech Level 2 coilover suspension, C6 Z51 Brakes
      See the finished product here:
      https://www.pro-touring.com/threads/...lle?highlight=

      2015 Camaro ZL1, intake, headers, pullies





    Advertise on Pro-Touring.com