Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 33

    Threaded View

    1. #28
      Join Date
      Nov 2012
      Location
      Sacramento, CA
      Posts
      1,918
      Country Flag: United States
      Quote Originally Posted by shmoov69 View Post
      Ron, I don't want to hijack the OP topic, but I do have a q about my issues that I had posted on the first page. I have no idea how hot mine was without an IR, but I'm assuming pretty stinkin hot when brake cleaner sizzled and evaporated instantly when I sprayed it (after about 10 minutes of cool down). What kind of damage would that cause or would a fluid change be all that's needed? It's a 9", stock iron case, stock Ford 3.00 gears and a new (in '05) Detroit locker.
      Thanks and if its a hijack, you can PM me. ;-)
      Hi Jimmy,

      Doesn't seem like a high jack to me ... same topic.

      The challenge is ... like I covered in a few of the bullet points ... different oils fail (viscosity break down) at different temps ... and different quality components (Steel they are produced with) fail at different temps. We don't know what temp your rear end got to ... or what temp your oil breaks down at ... or what temp your specific parts can & can't tolerate.



      My rule of thumb is 240° max with mineral based oil & 290° max with synthetic based gear oils. But gear oil viscosity can play a role in that. A thinner oil could break down at a lower temp ... and even though too thick of an oil adds heat ... thicker oils can survive higher temps. As far as the internals ... the only real way to know is to do an inspection. If they are failing, you will find micro particles in the gear oil, and see slight discoloration on or around the mating surfaces.

      For safety's sake, I would go ahead & do an inspection. If everything is ok ... next time you go run ... take an infrared temp gun & shoot the bottom of the housing often & keep track of the numbers. You can come back on here & share or PM me.









    Advertise on Pro-Touring.com