Results 1 to 6 of 6
Thread: 1ST Timer
Hybrid View
-
10-18-2013 #1
Registered User
- Join Date
- Mar 2007
- Location
- ghent new york
- Posts
- 52
1ST Timer
This is my first build every. It is a 67 Camaro that I bought about 6 months ago and is going to be a slow go. Its is a good start car with a little rust. It will have a 454 big block with either a super t10 or 3 speed automatic. Not sure yet. Going with disc breaks all around, DSE 3" drop leaf spring, DSE Tubular control arms, DSE subframe connecters ,roll cage. It is going to be a daily driver that I can autocross . I have been on the site for a while and seen some unbelievable cars be built and am excited to get started. I will be needing a lot of help from the great members of this site and will appreciate any advice that is given thanks
-
10-18-2013 #2
Registered User
- Join Date
- Apr 2001
- Location
- The Netherlands
- Posts
- 1,507
Welcome and good luck! I'm still driving my first build car (and modifying it)
10-18-2013 #3
Registered User
- Join Date
- Dec 2006
- Location
- Vincennes, IN
- Posts
- 98
Welcome, I have a 67 camaro with a BBC. Glad to see another one in the works! Good luck!
10-20-2013 #4
Registered User
- Join Date
- Mar 2007
- Location
- ghent new york
- Posts
- 52
Thanks guys . So i start to open up the motor and take off the intake and find who ever built the motor put ovel gaskets on a rectangle heads intake . That does not work so will be tearing in to the motor to see what damage there is. Found water in the heads was not pretty.
10-21-2013 #5
Registered User
- Join Date
- Mar 2007
- Location
- ghent new york
- Posts
- 52
I have looked around and know that you can use 4th gen camaro ls brakes on 1 st gens but what about the lt 1 brakes can get a 95 z 28 for 500 with everything on it was wondering if I can us the brakes. Thanks
10-22-2013 #6
Registered User
- Join Date
- Oct 2008
- Posts
- 125
Looks like a great project!
Custom Front Spoilers
www.spoilersbyrandy.com
Reply With Quote
