Results 1 to 2 of 2
Hybrid View
-
09-19-2013 #1
Registered User
- Join Date
- Jun 2012
- Posts
- 8
65 Chevelle Rear Disk Conversion Question
Hi all,
I've removed the old drum brakes and backing plate. Now ready to install caliper bracket, backing plate, axle, rotor...
I've been looking at this thing for a couple of hours and can't figure it out as to how it all bolts together.
If i bolt the caliper bracket to the axle, i can't bolt the backing plate to the bracket as the bolt heads are in the way. Plus when I bolt the calipeer to the caliper bracket, then it becomes obvious that I'm missing something big-time.
Any ideas?
-
09-20-2013 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
I think the caliper might go on the backside of the bracket.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
