Results 1 to 3 of 3
Thread: Heidts Pro G Question
-
08-05-2013 #1
Registered User
- Join Date
- May 2009
- Posts
- 60
Heidts Pro G Question
Alright , so this might be a stupid question and an easy fix , but it has me confused.
I am building a 68 camaro with SpeedTech front and rear Suspension. The front has SpeedTech upper and lower control arms and Chicane kit as well. I put it all together with factory spindles and it sat higher than I wanted so I ordered Heidts Pro G Drop spindles for it.
So here's my problem. With the New spindles my rotors are hitting the LCA before they are even seated completely on the spindle ?? My question is does this combination not work together or why is it hitting ?? Also I have a 13" 6 piston Wilwood brake setup on the front.
Any help would be greatly appreciated. Thank you , Mike.
-
08-05-2013 #2
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
Call blake at speedtech, he knows how his suspension works and what combinations dont.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
08-05-2013 #3
Registered User
- Join Date
- May 2009
- Posts
- 60
Heidts Pro G Question
Thanks Bryce , I will give Blake a call.
Reply With Quote
