Project BLUEprint, 1965 Falcon

[Bryce]

thats pretty cool. im in wyotech and want to do some similiar stuff to my 71 torino up in chassis fab and i was thinking maybe i could use my stock spindles and stuff to cut down cost while im in school and i could always upgrade it later. i wasnt sure if it was possible but now i see it is! thanks

John,

Good luck at Wyotech. The 71 spindles I thikn are mre desireable than the 65 spindles, they have a larger snout and may has the disc brake attach points already. The only downside to using the stock spindle is the long steering arm that may limit your steering options. Start a build thread on here and share the Torino love. FEtorino has a pretty cool build going right now. He put a full frame under it!

[jtjohn03]

John,

Good luck at Wyotech. The 71 spindles I thikn are mre desireable than the 65 spindles, they have a larger snout and may has the disc brake attach points already. The only downside to using the stock spindle is the long steering arm that may limit your steering options. Start a build thread on here and share the Torino love. FEtorino has a pretty cool build going right now. He put a full frame under it!

i will be sure to start a build thread on here once i get going. mine is already disk and everything so i think it work out pretty nice. if FEtorino has the Red 68-69 fastback then ive seen it over on lateral-g before. that car is awesome! i would love to do a build like that on my other 70 fastback.
thanks, Jay