Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. #1
      Join Date
      Nov 2005
      Posts
      827

      Rushforth Rated-X 18s BNIB - SOLD

      Rushforth Rated-X 18s BNIB

      People are always asking if we have anything "laying around" and we rarely do but today's your lucky day. These Super Spokes are brand new in the box and sitting here because they were made with perimeter hardware but our customer ordered them without.

      Specs are 18x8/ 4.875" Backspace and 18x9/ 5.0" backspace/ GM bolt pattern

      Retail $2700

      Yours today shipped anywhere in the lower 48 with a T-Shirt for $2250

      List Date: 1/4/2013

      For more info, click here to view the original listing: Rushforth Rated-X 18s BNIB
      --------------------------------------
      Item Has Been Sold.


      --------------------------------------


      Last edited by JayR; 01-06-2013 at 06:33 PM.

    2. #2
      Join Date
      Dec 2010
      Location
      Spring, Texas
      Posts
      40
      Country Flag: United States
      Will those fit 68 Camaro with stock a-arms, and stock 12 bolt rear?

    3. #3
      Join Date
      Aug 2012
      Location
      Woodcrest/Riverside CA
      Posts
      83
      Country Flag: United States
      Jay do you have any rated x like it says above?



    4. #4
      Join Date
      Nov 2005
      Posts
      827
      Quote Originally Posted by oldblu68 View Post
      Will those fit 68 Camaro with stock a-arms, and stock 12 bolt rear?
      Yes, they're almost exactly what we'd spec for a 67-68 F-Body and should be an easy fit

      Quote Originally Posted by Sanchez Garage View Post
      Jay do you have any rated x like it says above?
      Sorry about that, I had just gotten emails from 10 people in a row looking for Rated-Xes so it was kind of seared in my brain at the time I made the post but we can certainly make you a set. I'll even throw in the shirt ;)
      Jason

    5. #5
      Join Date
      Dec 2004
      Posts
      381
      Country Flag: United States
      What does almost exactly what we'd spec for a 67-68 mean? I am interested for my 68 Camaro. I have lowered the rear with DSE 3" springs and the fender lips are rolled some as well. I would prefer 9.5" wide but whats a 1/2" right. Let me know the difference and I will make a decision. I assume they are not scratched u or anything correct?

      Thanks, Erik

    6. #6
      Join Date
      Nov 2005
      Posts
      827
      Quote Originally Posted by Erik Beckett View Post
      What does almost exactly what we'd spec for a 67-68 mean? I am interested for my 68 Camaro. I have lowered the rear with DSE 3" springs and the fender lips are rolled some as well. I would prefer 9.5" wide but whats a 1/2" right. Let me know the difference and I will make a decision. I assume they are not scratched u or anything correct?

      Thanks, Erik
      They are 5.0" backspace instead of the 5.25" backspace we would typically put on a 67-68 but with a rolled lip, you should be fine. Keep in mind, a 9.5 is only available in step-lip but we can make them.

      No, they aren't scratched, just the flash bouncing off the swirl marks and I'll clean them off and give a quick polish before we ship them.
      Jason

    7. #7
      Join Date
      Feb 2009
      Posts
      44
      Does this mean your able to machine rims again?....Is the Machine shop you deal with pumping these babies out again?

    8. #8
      Join Date
      Nov 2005
      Posts
      827
      Quote Originally Posted by jonfarrugia View Post
      Does this mean your able to machine rims again?....Is the Machine shop you deal with pumping these babies out again?
      Yes Jon, much too long of a story for the forums but production is in full swing.
      Jason

    9. #9
      Join Date
      Dec 2004
      Posts
      381
      Country Flag: United States
      Hey jason,

      I sent you an email. I was wanting to get a pic of the rear rim to see how much lip it has Is that possible?

      Thanks, Erik

    10. #10
      Join Date
      Dec 2010
      Posts
      246
      I paid full price for my rushforth wheels and didn't get a shirt! Shucks!




    Advertise on Pro-Touring.com