Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States

      Different T56 Clutch Line Quick Disconnects?

      I'm installing a Viper T56 behind an LS3 in a '68 Camaro. I've got an LS1 hydraulic hose with the quick disconnect that mates perfectly with an LS1 slave cylinder. Because the Viper slave cylinder mounting holes are clocked differently than the LS1 T56, I'm using a Viper slave cylinder.

      I can't get the LS1 quick disconnect to latch into the Viper slave cylinder quick disconnect. I can feel the mating surface in the connector on the slave give as I push the hose fitting in, but it just won't latch.

      So, my question: Are there different configurations of quick disconnects between the Viper and the GM T56s, or am I just not pushing hard enough? (I'm pushing pretty darn hard, using a screw driver to lever the fitting into the slave - still no go.)
      Mike Kelcy - '68 Camaro with some stuff done to it.

    2. #2
      Join Date
      Jun 2009
      Location
      Central FL
      Posts
      1,231
      I'm doing the exact same thing. What you need is LS1 braided line and viper slave. To get them to mate you need a F-body slave female connector on to the viper slave. The viper slave connector is slightly to big to make a seal. I've been researching this for weeks.
      Dan
      1968 Camaro v2
      LS6 :: Viper T56 :: C5 Brakes :: Hotchkis Suspension


    3. #3
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by Vicinity View Post
      I'm doing the exact same thing. What you need is LS1 braided line and viper slave. To get them to mate you need a F-body slave female connector on to the viper slave. The viper slave connector is slightly to big to make a seal. I've been researching this for weeks.
      Yes, that's what I've learned. I'd love to get this working without pulling the transmission, but that's likely where I'll end up. What could be better than pulling the exhaust, pulling the driveshaft and yanking the tranny simply to get a working clutch?
      Mike Kelcy - '68 Camaro with some stuff done to it.

    4. #4
      Join Date
      Jun 2009
      Location
      Central FL
      Posts
      1,231
      Quote Originally Posted by Mkelcy View Post
      Yes, that's what I've learned. I'd love to get this working without pulling the transmission, but that's likely where I'll end up. What could be better than pulling the exhaust, pulling the driveshaft and yanking the tranny simply to get a working clutch?
      You could try something with the Viper stainless line, but I'm not sure what you'd need to adapt it to your master.
      Dan
      1968 Camaro v2
      LS6 :: Viper T56 :: C5 Brakes :: Hotchkis Suspension


    5. #5
      Join Date
      Aug 2004
      Location
      San Antonio, Tx
      Posts
      1,193
      you could also convert it to AN

      http://www.summitracing.com/parts/MCL-139026/
      Instagram: CamaroAJ

    6. #6
      Join Date
      Nov 2004
      Location
      Colorado
      Posts
      1,260
      Country Flag: United States
      The quick connect is removable from the slave. Can you swap the LS1 and viper parts?

      You might also want to check with Mcleod, they might have a line for the master that will work.



    7. #7
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by EFI69Cam View Post
      The quick connect is removable from the slave. Can you swap the LS1 and viper parts?

      You might also want to check with Mcleod, they might have a line for the master that will work.
      No help from McLeod, they say one size fits all. I've resigned myself to swapping the QDs as you and others have suggested, and will be pulling the transmission this weekend. This is only about the 5th time I've R/R'd that darn thing.

      On the plus side, I needed to loosen the headers to do a different task (replace the C5 eccentrics on the LCAs with the Pfadt pieces), so I'll kill two birds with one stone.

      The brakes are fully plumbed and bled so when I get a functioning clutch, I'll be able to fire the engine for the first time ever and move the car under its own power for the first time in about a decade.

      Getting closer all the time, but this %#^& thing is fighting me every step of the way.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    8. #8
      Join Date
      Jun 2009
      Location
      Central FL
      Posts
      1,231
      Mike, can I ask what Bellhousing you decided on? I'm still debating on which to order.
      Dan
      1968 Camaro v2
      LS6 :: Viper T56 :: C5 Brakes :: Hotchkis Suspension


    9. #9
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by Vicinity View Post
      Mike, can I ask what Bellhousing you decided on? I'm still debating on which to order.
      I'm using a McLeod modular bellhousing. The only down side is that there's no way to check alignment because there's no circular surface that's concentric with the crankshaft.
      Mike Kelcy - '68 Camaro with some stuff done to it.




    Advertise on Pro-Touring.com