Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 32
    1. #1
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States

      project 71'fbird

      i got a 1971 firebird 4 years ago from my dad and immidiately started working on it, saved what i could over the summer took the car to a body shop to get it painted and that turned out to be a very big mistake they said it would take them about 2 months to have it painted and boy was that a lie it was there for over a year and they never even thought about starting so i got ripped off and got my car back in worst condition then when i dropped it off guess thats what i get for not taking my dad with me(i was 16 at the time) so finally after getting over the anger and some problems iv decided to give my baby some attention. I'm still not quite sure what direction i wan a go with my project but iv been getting some nice ideas from you guys!
      the original plan was to paint it black and keep it completely stock since its a numbers matching car and its got 52,xxx original factory miles iv got tons of paper work for it thats what every one thinks I'm going to do BUT i want a badass pro touring car..ill try n post some pictures

      Name:  PhotoMoto 0550.jpeg
Views: 1444
Size:  59.3 KBName:  PhotoMoto 0551.jpeg
Views: 1395
Size:  80.0 KBName:  PhotoMoto 0552.jpeg
Views: 1392
Size:  49.7 KBName:  PhotoMoto 0553.jpeg
Views: 1394
Size:  47.6 KBName:  PhotoMoto 0555.jpeg
Views: 1392
Size:  59.3 KBName:  PhotoMoto 0558.jpeg
Views: 1453
Size:  49.9 KB
      ill figure out how to make these bigger

    2. #2
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Welcome.....cool stuff, another 71 Firebird project!!! Outstanding.
      Keep us up to date with your plans.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    3. #3
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      Name:  IMG00263.jpeg
Views: 1216
Size:  142.0 KBName:  IMG00264.jpeg
Views: 1266
Size:  155.2 KBName:  IMG00265.jpeg
Views: 1236
Size:  167.3 KBName:  IMG00266.jpeg
Views: 1224
Size:  143.0 KBName:  IMG00267.jpeg
Views: 1258
Size:  149.7 KB
      thanks and iv started some work on it and even though I'm not a preoffesional i learn fast and its moving along great!
      i was surprised to see it so clean the body had quite some rust!

    4. #4
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Was thinking it looked pretty clean underneath....that'll save some $ and time.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    5. #5
      Join Date
      Mar 2007
      Location
      Florida
      Posts
      2,391
      Country Flag: United States
      Welcome to the forum! Looks like a great project.



    6. #6
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      Quote Originally Posted by NOT A TA View Post
      Welcome to the forum! Looks like a great project.
      thanks, its gone be tough building this one but I'm dedicated i want to see the fbird back on the road and in showroom conditions, i get made fun of a lot by my cousins and friends because they have some neat cars and i have my "old piece of junk" but i know for a fact I'm going to end up with something more unique, and rare then they're cars...(05 mustang gt with the cervinis c-series kit, a 69 camaro SS project, an 08 saleen s331, 06 saleen s281"mustang", 99 cobra, and the list goes on...
      so tomorrow morning I'm going to the shop and taking my car home, I'm also taking all the tools and car parts that are in it(its being used as storage) that way the guy has to look for me and i won't hive him anything back till he gives me some $$...he has bumpers paint guns some materials like fiberglass, bondo, clear, some tools and a whole lot of parts that belong to other customers. yes its not the right thing to do but nobody likes being screwed over...and this is the only way i can assure myself that ill get some cash back

    7. #7
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      how can i get some renderings done? i can draw pretty damn good but id like to see ho it would look with the ideas i have

    8. #8
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Theres a forum for multimedia....check out some of the guys doing renderings in there and contact them for prices etc.
      Some guys may photoshop something up for you as a favour if you ask.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    9. #9
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      I'm trying to get everything that i need for the body before i paint it, i was also wondering if gto seats would fit, they look a bit wide but I'm in love with them i drove my buddies 06 gto yesterday and they just feel right, if i get them can i make them function, up down forward and back??
      also is it a bad idea to run my exhaust right next to the gas tank?(heat wise?)
      here are some pictures..
      i didn't have anything to do at 2am so i drew my friends mach 1..
      Name:  IMG_0098.jpg
Views: 1224
Size:  193.1 KB
      ok so for the hood i love the stock look but with the paint job I'm going it just won't work so I'm building a custom one i was gonna go with a regular 4" cowl but I'm trying to build something somewhat unique so this is what i have so far..
      Name:  IMG_0067.jpg
Views: 1090
Size:  211.8 KBName:  IMG_0049.jpg
Views: 1116
Size:  149.4 KB
      Last edited by 71fbird; 05-20-2012 at 01:22 PM. Reason: mistakes

    10. #10
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      Slope it up more of the sides and you'll have a good look going. Looks like a box right now with those vertical sides.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    11. #11
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      it looks square in the pics but theres a bit of a slope, i tried to keep the slope on the hood and I'm trying to make the front look like the nose to keep the theme going it'll look a whole lot better when i weld in the front!! I'm currently working on my exhaust tips but I'm still no sure if it would be safe to run the pipes between the gas tank and the "roll pan"?? I'm also confused about the dash it has a few cracks and i don't know how to take care of those should i sand it down and use fiberglass to fill them and paint it or should i take all the vinyl off and reupholster it it just seems like the hardest thing in the world.. like i said I'm new to all this but cars are my passion =)
      another question how close would an 06 gto dash fit and what would i need to tweak of fabricate to make it look like it belongs there??

    12. #12
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      I think there is a build thread on here with a GTO dash and it came out really nice. I will do my best to remember who had done this. It is towards the end of that thread.
      Stephen

    13. #13
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      i have another question i can't figure out how i would make the gto gauges work, I'm not swapping the engine for no so the transmission stays too , my current speedo uses the cable system and the gto speedo uses the pulse system i know theres a way to convert the pulse into rotation with a small motor, but is there any way to do the opposite? and with that said can i get the fuel, temp, and rpms working too? i have a plan b if that doesn't work ill just keep mu original gauges ill just have to make a custom carrier so it'll look like it belongs..

    14. #14
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      Looks like you found the thread since you posted in it, but this is the same one I was thinking of: https://www.pro-touring.com/showthre...-to-1977/page2
      Stephen

    15. #15
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      yeah it took me a while but i finally found it, looks good, i found a wrecked 06 gto 15 min away from my house but the guy won't part it, its missing seats engine and transmission.. so not worth buying... i really want all 4 of those gto seats, but they're so expensive and unfortunately have a budget..

    16. #16
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      I believe the GTO seats will fit, but they're a little bulky....if you aren't too tall, they'll work.
      I used mid 80's Corvette seats in my 71...they adapt to the factory sliders very easily and they give more headroom if you're tall...and good support. Anpother advantage, they're probably pretty cheap to locate a set....the foam/leather parts are clip in inserts - you just buy new ones in the colour you like and clip them into the plastic seat frames...no labour costs to trimming the seats.
      A cheap fix for your dash is to use a "dash cap" which basically glues over the whole factory dash....done right, they look fine and a lot of people won't even know there is a cap on there. Google up F-Bodywarehouse and have a talk to the owner, Pete....they have probably the best dash caps for 2nd gen Firebirds.

      I like where you're going with the hood...clearance on these cars is tight under a stock hood.....check out pics of a 68 Shelby GT500 for some ideas on that style of hood you're working on.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    17. #17
      Join Date
      Sep 2004
      Location
      Fresno, Ca
      Posts
      379
      On the hood- if you were to close off the front center of it, it'd sort of resemble a Formula hood... or a '69 Trans Am hood. Might be worth looking at some pix to see what I mean.

    18. #18
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      i will close of the center of the hood to get that formula look, and keep the looks of the nose going on the hood, I'm not a very tall person so i don't ming having limited head room but ill try my best to make them look right, I'm still trying to figure out a couple of things like how to make the gto speedo work with the cable system..i will post some pictures of the parts that came un as soon as i get home

    19. #19
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      You can buy cable to digital pulse sender adapters.....a lot of the gauge companies sell them. Try Classic Instruments.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    20. #20
      Join Date
      May 2012
      Location
      Costa Mesa, CA
      Posts
      24
      Country Flag: United States
      nice ill have to do that, every one iv asked has told me I'm crazy, theres no such thing as a cable to pulse adaptor...(employees at auto zone and local shops).. but anyway they've started the body work for the 3ed time and this time I'm making sure they do it right!! i go some parts for the fbird as well..i really want the steering wheel controls to whorl and I'm trying to make the paddle shifters work with my auto transmission i want to hide the actual shifter so no one will know how to shift the gearsName:  IMG_0246.jpg
Views: 883
Size:  125.0 KBName:  IMG_0245.jpg
Views: 883
Size:  208.8 KBName:  IMG_0244.jpg
Views: 896
Size:  214.7 KBName:  IMG_0243.jpg
Views: 849
Size:  230.7 KBName:  IMG_0242.jpg
Views: 834
Size:  209.9 KBName:  IMG_0241.jpg
Views: 929
Size:  209.5 KBName:  IMG_0240.jpg
Views: 889
Size:  224.6 KBName:  IMG_0239.jpg
Views: 824
Size:  232.5 KBName:  IMG_0238.jpg
Views: 871
Size:  271.1 KB

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com