Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 3 1 2 3 LastLast
    Results 1 to 20 of 52

    Thread: 1969 Camaro

    1. #1
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States

      1969 Camaro

      This is a '69 Camaro that I picked up that started as a pro-street car. I pulled all of the pro-street stuff out except for the Alston 8 point cage.

      Car is about 8 weeks behind schedule due to engine builders that cant keep there promises but it will be getting a 420 hp 383 that should be here in one week.

      Other items I installed:

      12 bolt posi, Global West upper control arms, Global West sway bar, new Baer Track Plus brake system with 13" rotors up front and 12" rear, 17x9.5 Torque Thrusts with new 275/40 BF Goodrich G-Force Sport tires on all four corners, Muncie M-21 rebuilt in 2008(have receipts), 2" drop leaf springs, new engine wiring harness, re-installed new heater control, heater core, and boxes, all weather stripping has been replaced including at hood and trunk.

      Interior of the car is cherry and I just ordered new Corbeau seats.

      These pics are without engine and rear drop leafs installed.






      Asking $28,000

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    2. #2
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      ttt

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    3. #3
      Join Date
      Jun 2007
      Location
      Auburn, CA
      Posts
      613
      Country Flag: United States
      So that's what you did with the Torque Thrusts!



      Good luck, bump
      Tim Tracy
      68 Camaro 496 / T56 - Never Finished
      68 Camaro Real Z/28 - Under Restoration
      67 Camaro Project - Never going to have time


    4. #4
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by Gitter Dun View Post

      Other items I installed:

      I just ordered new Corbeau seats.
      what model i could have helped you on those man

    5. #5
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Quote Originally Posted by TT302Z28 View Post
      So that's what you did with the Torque Thrusts!

      Good luck, bump
      Yup, you got me!!

      Thanks Tim, hopefully I'll see that motor soon so that I can finish her up.

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    6. #6
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      what model i could have helped you on those man
      Thanks Rod!! Going with the Baja XRS's. PM me with some details, I'm probably going to change the ones out in my car.

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    7. #7
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Got a call from the engine builder today and he finally finished motor. He told me it dynoed at 421 HP. Buy the time I get the motor she should be done in about 3 weeks from today so if anyone is interested please let me know.

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    8. #8
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Finally got tracking number on motor and it will be here August 30th. Car should be completed by the middle of September.

      Engine made 421 HP and dyno sheet will be included.

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    9. #9
      Join Date
      Apr 2009
      Posts
      136
      You can have my car in trade lol
      1992 Z28 vortec 350 auto hardtop
      2001 regency Sierra 4.8 stepside slammed with big wheels
      1992 RS heritage edition 305 5 speed t tops (Sold)
      1991 z28 350 hardtop 12k miles (sold)
      1996 Z28 44k miles (sold)
      1994 z28 vert (sold)
      1979 Z28 (sold)
      1991 S10 350 swap (sold)
      and a ton more...

    10. #10
      Join Date
      Sep 2011
      Location
      Las Vegas,nevada
      Posts
      15
      The car looks great in white.
      I live my life a quarter mile at a time cause for those 10 seconds I don't have a care in the world.

    11. #11
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Thanks guys. Motor showed up on August 30th. I have the build and dyno sheet. It's all Eagle components with Speed Pro pistons. Basically building this one as a nice street driver, 421 HP at around 5600 rpm.




      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    12. #12
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Resurfaced the flywheel and through on a new Center Force 2 clutch and pressure plate.

      Waiting on throwing the motor in because I'm thinking about a Speed Direct rack-n-pinion or may replace manual steering box with a power unit.




      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    13. #13
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Motor, trans, driveshaft are in. Manual steering box was replaced with power unit. Had to drop her down off the jack stands before I bolted up the cross member just to get an idea of the stance up front. Looks like once I get everything else bolted in she should look perfect.

      Oh, yeah, and my new Corbeau A4's showed up today. Thanks for the seats Andrew.




      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    14. #14
      Join Date
      Jun 2007
      Location
      Auburn, CA
      Posts
      613
      Country Flag: United States
      Is this really for sale or are you just teasing!

      Great project, congrats on getting your engine finally.
      Tim Tracy
      68 Camaro 496 / T56 - Never Finished
      68 Camaro Real Z/28 - Under Restoration
      67 Camaro Project - Never going to have time

    15. #15
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Quote Originally Posted by TT302Z28 View Post
      Is this really for sale or are you just teasing!

      Great project, congrats on getting your engine finally.
      Yes, definitely for sale. The construction business is slow and I'm looking for an alternate way to make some extra cash. My brother-n-laws and I have 3 other cars we are going to be building as of now.

      As soon as the other '69 gets out of body shop jail I will probably start posting that one also. The other cars they picked up are a 68 Camaro, 70 corvette, 70 GTO.

      Thanks for the interest Tim, I'll keep you guy's posted.

      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    16. #16
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      My fuel pump, alternator, distributor, and radiator should be showing up tomorrow and then hopefully I'll get her fired up some time tomorrow night or the day after. Center console with Autometer gauge pod wont be showing up until the 25th.




      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    17. #17
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Installed fuel tank, new fuel lines, new fuel pump, and new one wire alternator(previous alternator was for bracket mock up). The new Be Cool radiator and MSD distributor showed up but I ran out of time. Not much left to do to fire up motor.

      I wont have time the rest of the week to work on her because I will be working on my car to prep it for Buttonwillow Race Park but I suspect I should be firing up motor next Monday or Tuesday.



      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    18. #18
      Join Date
      Jan 2011
      Location
      fort worth,texas
      Posts
      96
      man thats nice. i like 69 camaro's in white
      1962 Impala vert

    19. #19
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      Quote Originally Posted by SOM1969 View Post
      man thats nice. i like 69 camaro's in white
      Thanks man!!

      A little more progress today. Installed driver side header, mounted radiator, lower radiator hose, power steering pump and belts. Installed distributor, wires, and spark plugs.

      Still waiting on Autometer gauges that I ordered and need to mount coil and MSD box. Then I need to find some pretty wire looms and air cleaner.





      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    20. #20
      Join Date
      Dec 2009
      Location
      El Dorado Hills
      Posts
      1,645
      Country Flag: United States
      My new center console showed up last week and I wanted to be sure the width of the new Corbeau seats wouldn't conflict with the center console so I set them in place.







      Gaetano Cosentino
      Dont Drive Faster Than Your Angels Can Fly

    Page 1 of 3 1 2 3 LastLast



    Advertise on Pro-Touring.com