Moser 9" for 67 Camaro - LS1 brakes?

[Rhino]

If you want to use ls1 brakes you'll need to use hybrid ends on the 9". I know moser offers them. It's a Torino big bearing end with gm bolt pattern. You'll then use the ls1 brake backing plate as a bearing retainer.

The brake offset for gm rear brakes is 2.75. A stock ford rear brake offset is 2.5"

[BBPanel]

If you want to use ls1 brakes you'll need to use hybrid ends on the 9". I know moser offers them. It's a Torino big bearing end with gm bolt pattern. You'll then use the ls1 brake backing plate as a bearing retainer.

The brake offset for gm rear brakes is 2.75. A stock ford rear brake offset is 2.5"

I just did this on my 9" and have found that the t-bolts (1.25") are not long enough. Have not found one longer yet - may have to grind the heads off standard bolts.