Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Oct 2010
      Location
      SLC
      Posts
      660

      Need a new coil.

      I need a new coil for my 289 and I'm overwhelmed with choices. I have a dual points mallory distributor. anyone have any recomendations on what coil to run and why?
      thanks.
      Zach

      1970 Mach 1 build - Half-Breed (pro-touring.com)

    2. #2
      Join Date
      May 2010
      Location
      Orange, CA
      Posts
      456
      PerTronix, Flame Thrower. Good reliable coil, looks similar to stock with high out put. Also I would ditch the points and put the PerTronix Ignitor II in the Mallory dist. - better starting, smoother running and never touch it again.
      Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming 'WOW What a Ride!'

    3. #3
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Hey Zach, I agree with Don...they were great in their day....but ditch the points and don't look back.
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454


    4. #4
      Join Date
      Oct 2010
      Location
      SLC
      Posts
      660
      Thanks for the advice. I agree the points are less than ideal. in time I would love to put the pertronix ignitor in, but for now I'm just trying to keep th car on the road for cheap. It's my rat rod and I don't want it to take money away from my current project car.
      Zach

      1970 Mach 1 build - Half-Breed (pro-touring.com)

    5. #5
      Join Date
      Feb 2009
      Location
      muggy midwest
      Posts
      533
      Country Flag: United States
      any worthwhile coil is gonna cost at least as much as a Pertronix kit anyway-I'd do both. For a coil I would suggest the Mallory Pro Tower coil...they are oil filled and stay cool even under extreme use so there is no voltage loss from heat. Any HO coil will shorten the lifespan of your points even with a ballast resistor so upgrading to a Pertronix kit is worthwhile.

      "...if at first you don't succeed, try again.
      If you still don't succeed, then quit-no sense being a damn fool about it..."
      -W.C. Fields

      HARNESSWORX
      (formerly gmachinz)

    6. #6
      Join Date
      May 2010
      Location
      Orange, CA
      Posts
      456
      Quote Originally Posted by H2Ogbodies View Post
      any worthwhile coil is gonna cost at least as much as a PerTronix kit anyway-I'd do both. For a coil I would suggest the Mallory Pro Tower coil...they are oil filled and stay cool even under extreme use so there is no voltage loss from heat. Any HO coil will shorten the lifespan of your points even with a ballast resistor so upgrading to a PerTronix kit is worthwhile.
      There are basically only two types of coils made these days. Oil Filled, which are 90% of what is out there, and Epoxy filled which are designed for high vibration applications like race cars or off roading.
      Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming 'WOW What a Ride!'




    Advertise on Pro-Touring.com