Results 1 to 15 of 15
Thread: Spring for '70 El Camino
-
09-26-2010 #1
Registered User
- Join Date
- Sep 2010
- Posts
- 30
Spring for '70 El Camino
I thought I had Moog stock replacement springs on my car, but I can't find any markings to prove it. I bought Hotchkis 1" drop springs.
They dropped the rear 2", how much clearance between the well and tire should I have?
I only accomplished the passenger front and its is raised an 1"! Should I get the drivers done before I judge the height or should I start cutting the passenger to determine the height I want?
Any advice or recommendations are greatly appreciated!Ron
1970 El Camino
-
09-26-2010 #2
Registered User
- Join Date
- Sep 2010
- Posts
- 30
Just took some pics and measurements. Before the spring change, the car was right around 26" from the floor to the middle of the well at each wheel. Now I am 24" in the rear with 1/2" clearance between my well and tire, is this too close? Do I need to go up?
Now the front is 28". Hotchkis says 1" out of the spring = 2" in ride height, but emphasizes to stay on the conservative side. Any suggestions on how much to cut?Ron
1970 El Camino
-
09-26-2010 #3



Reply With Quote