Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Feb 2002
      Location
      Santee, CA
      Posts
      387
      Country Flag: United States

      Need help with convertible top frame

      Decided to test fit my convertible top on my 69 Camaro to determine what parts I still needed. Looks like I have everything I need except the bolts/bushings to attach the cylinder rod to the top frame. Does anyone know if these parts are available? Or is there an alternative way to attach the lift cylinders?

      This was originally a manual top car and I thought I had purchased all of the parts needed, but these appear to be missing. Thanks...Eric


    2. #2
      Join Date
      Feb 2003
      Location
      St. Louis, Missouri
      Posts
      987
      Country Flag: United States
      Doesn't the manual assist assembly have the same bolts/bushings at that connection?

      Rick Butterfield

    3. #3
      Join Date
      Feb 2002
      Location
      Santee, CA
      Posts
      387
      Country Flag: United States
      Quote Originally Posted by Happyfunballs View Post
      Doesn't the manual assist assembly have the same bolts/bushings at that connection?
      Unfortunately no. The springs have a square bushing that slips over the end and fits in the groove. From what I can tell looking at the body manual, the power top cylinders use a pair of bushings and spring washers.

      I don't have a picture of the bushing in place, but you can see from the picture below, that the end of the spring mechanism is different than the lift cylinder.


    4. #4
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      To my knowledge, the bolts you're talking about are available from places like Hydroelectric, along with the bushings for them.

      http://www.hydroe.com/Chevrolet_Camaro.html

      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...

    5. #5
      Join Date
      Feb 2002
      Location
      Santee, CA
      Posts
      387
      Country Flag: United States
      Quote Originally Posted by wmhjr View Post
      To my knowledge, the bolts you're talking about are available from places like Hydroelectric, along with the bushings for them.

      http://www.hydroe.com/Chevrolet_Camaro.html
      Thanks for the referral to Hydroelectric. Very friendly people to deal with and they had the parts I needed! ---Eric




    Advertise on Pro-Touring.com