Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 2 FirstFirst 1 2
    Results 21 to 24 of 24

    Thread: Lift in action

    1. #21
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Quote Originally Posted by Riderz Cycle View Post
      I just picked a used lift up for $750 out of a dealership going out of buisness...had to take it down and put it up myself but hey for $750 and an afternoon I'll take it...Guys may want to shop around a ton of lifts are out in market with all the dealerships closing...
      good idea.....
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454


    2. #22
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by Riderz Cycle View Post
      I just picked a used lift up for $750 out of a dealership going out of buisness...had to take it down and put it up myself but hey for $750 and an afternoon I'll take it...Guys may want to shop around a ton of lifts are out in market with all the dealerships closing...
      That's sure what I'd do - if I could have.

      Unfortunately, I'm not blessed like some of you guys with tall ceiling garages :( I had to settle for a lift that I could at least roll around under on my mechanics stool. Even if I were only going to raise it halfway, a full height lift couldn't be installed in my shop. The Maxjax are a pretty convenient compromise.

      Truth is, you just don't know how handy those things are until you have one! Even simple stuff like tire rotations are now a breeze.
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...

    3. #23
      Join Date
      Jul 2006
      Location
      Phoenix
      Posts
      467
      Just a word of caution. Make sure the concrete it's anchored to and the anchors used are suitable.

      Erik

      https://www.pro-touring.com/showthre...without-a-name

      Camaro LS2, T56, 12 bolt, C6 Z06 brakes, Rushforth Super Spokes, ATS Spindles
      2006 Chevy Trailblazer SS

    4. #24
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by ErikLS2 View Post
      Just a word of caution. Make sure the concrete it's anchored to and the anchors used are suitable.
      There's another entire thread (now closed) about that very subject.....
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...

    Page 2 of 2 FirstFirst 1 2



    Advertise on Pro-Touring.com