Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 9 of 11 FirstFirst ... 4 5 6 7 8 9 10 11 LastLast
    Results 161 to 180 of 206
    1. #161
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      so yes, i know its not sunday after church. Mary spiked a 102 fever yesterday, and everything went on hold. she just went to bed for a little while so i have a minute. however long she sleeps. ill work on my update.

      sunday morning, we overslept for church. Mary was with grandma for the morning (spent the weekend), and we were lazy. nice not to have a child that wakes you up at 5:30-6:00 for a couple fo mornings. Jennifer (the most awsome wife in the world)volunteered to bring her cofee down to the garage and help me out. while i was getting steering linkages unbolted, truck on jackstands, wheels knocked back off, and steering box removed, she worked on cleaning up the firewall where a PO had used bathroom caulk to seal around the firewall. she also did most fo the masking for me. after it was all done, she grabbed a brush and the can of POR15 and asked where to start. i really need to get her something cool for mothers day. not every wife will apply that stuff on a sunday morning.....

      she did th top side, while i took the underside. we lwt the stuff dry while we removed the motor mount brackets, exhaust manifolds, oil pressure sender, and clutch from the 2.8. she went upstairs to get ready for the VBS meeting, and i started spraying the firewall and inner part of the outer fenders. heres what it looked like after all that work. sprayed almost an entire can of the JD medium gloss. so theres another 8 bucks....



      while that was drying, i broke out the can of gloss black krylon and sprayed the heater box. ive had that can for a long time, its starting to get a little empty.....



      i had a few minutes tonight before getting Mary from daycare to get some stuff put back together, and some tape peeled off. heres what it looks like now.





      i think its looking really, really good. little too nice for this thing to still be called the drivabeater.....

      anyway, if youve read this far, youll probably be interested to see where monew has gone. so, for this installment, im adding in the whole engine swap costs up to this point.
      previous balance: 2395.12
      parts :
      can medium gloss JD: 8
      3 cans of duplicolor engine paint: 23
      gaskets, wires, thermostat for 3.4: 154.04
      plugs: 17.94
      PCV:2.69
      3.4 from 95 firebird: 75
      wiring harness and ECM from 93 lumina: 50
      gasket cement: 5.99
      total so far:

      sit down, now.....


      2731.78





      HOLY CRAP!!!!!!
      im never gonna see that money out of this thing........


      but its been a hell of a ride so far. guess ill keep going.
      michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    2. #162
      Join Date
      Jul 2009
      Location
      Sackville, NB, Canada
      Posts
      166
      Country Flag: Canada
      Looks great Michael! I can't wait to see how it performs with the new power plant.
      Tyson
      '95 Firebird Formula: suspension + 315's
      '66 Mustang Coupe, 289

    3. #163
      Join Date
      Mar 2009
      Location
      Southern Maryland
      Posts
      402
      Quote Originally Posted by dusterbd13 View Post
      joe:
      well have to run them at one of the events when your done. show all the other guys what these budget built sport trucks will do.
      Still enjoying watching your progress. I've got around $1,500 in my ranger so far including purchase price. Most of it in maintenance stuff to get it road worthy. I'm thinking about doing a brake upgrade first as my right rear drum is sticking and instead of sinking money in the junk drums I figure I will just swap to cobra stuff. I'm still planning on starting a build thread, just have to get some parts. I'm thinking of naming it project alter ego, the alter ego of project driveabeater. Although I should paint it white. A white ford ranger in response to a black s10, lol.

    4. #164
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      that would be really, really cool.

      id probably look at one of the turbo 4 bangers they put in the fox bodys. big v6 vs. little boosted 4.
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    5. #165
      Join Date
      Mar 2009
      Location
      Southern Maryland
      Posts
      402
      Quote Originally Posted by dusterbd13 View Post
      that would be really, really cool.

      id probably look at one of the turbo 4 bangers they put in the fox bodys. big v6 vs. little boosted 4.
      Still undecided on that part. I am into the whole diesel thing, so part of me wants to do a 4 cylinder turbo diesel, which would really be opposite of what you have going on.

      On the other hand I have wanted a small block ranger for a long time, and the turbo 4 stuff is all bolt on. Decisions, decisions.

    6. #166
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      well, if i can do any more to help you have more ideas, let me know.

      thank you for letting me inspire you.

      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater


    7. #167
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      im tired, so quick update.

      THE 3.4 IS IN!!!!!

      my best friend and i have been at it since about 4. im beat.

      went well, except...

      the damn junkyard oil pan has a couple of pinholes in it that are dripping pretty good. anyone have a fix, other than yanking the motor back out and swapping on another pan?

      when i saw it, i got really, really discouraged. cleaned up the shop and quit for the night.





      tightest spot of clearance. might not work with stock uppers.


      budget remains the same. maybe ill feel better about things things tomorrow

      michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    8. #168
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States

      It ran!!!!

      I've been down in the shop since after dinner, putzing with the wiring and fuel lines.

      got almost all the wiring sorted out. fuel lines are done.

      nothing picture worthy, mind you.


      i also JB welded the oil pan pinholes. so far, no leaks. well see what it looks like in the morning.

      i wanted to get some oil moving throughout the engine and test connections, so i hooked the battery back up. spun the key, and it sounded so nice hearing it turn over. i threw some plug wires on it, and it sounded like it wanted to start. little ether down the throttle body, and she fired right up. only ran for a couple of seconds due to the fuel pump not working, though. gotta figure that out yet.

      but I'm stoked. lot more positive than my last post. lot more. my spirits and attitude are back where they should have been Friday.

      i know better than to let a minor setback knock me that hard, but after a week long migraine and extra hours on top of it, i did. so....


      anyway, just a minor, non picture worthy update. I'm gonna mess with it some more after work tomorrow.

      Michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    9. #169
      Join Date
      Apr 2005
      Location
      dayton, oh
      Posts
      952
      cool swap. has anything been done to the motor?
      dave.t
      86 Olds 442 - Project If It Ain't Broke, Take It Apart and Fix It
      74 Javelin AMX - stocker

    10. #170
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      not yet. still up in the air at the moment, but im thinking about forced induction.
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    11. #171
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      really ugly update time.
      thanks to a lot of sugestions from a lot of different forums i frequent, it got running. what actually happened was that i tapped teh wrong power wire for the swicthed power to the ECM. once i got that changed around, she fired up on the first lick.
      vital signs:
      60lbs oil pressure on cold 5W30
      no leaks yet
      no smoke
      no noises
      800 RPM idle
      check engine light for a lot of reasons.
      i didnt get much further than gtting it running tonight, as my dad thought he was having a heart atack. i spent the eening at the ER with my family. He's fine, and they said he didikn have a heart attack, but dont know what happened. hes pissed they wouldnt let him go home.
      so tomorrow night, im going to finalize the few wires i jhavent hooked up yet, and start looming, taping, tightening, etc the engine bay harness. hopefully im about done with wiring.

      heres the pic i snapped at the end of the night. its ugly, but shows where im coming from on the wiring.
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    12. #172
      Join Date
      Nov 2007
      Location
      Oro Valley, AZ
      Posts
      80
      Far from ugly, I think it's a thing of beauty
      -Darren-
      '78, '81 Malibu, '92 Sierra

      Quote Originally Posted by joemac View Post
      ...not only am I talking to myself as I'm going down the road I'm starting to answer myself and laugh at my own jokes-out loud...

    13. #173
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      update time:previous balance:2731.78
      budget:
      27 for crimp connectors and heat shrink at Fastenal. i really like their crimp connectors. brass, stepped, and rarely have a mis-crimp. their heat shrink is also adhesive lined.
      41 for fuel line, filter, hose clamps, antifreeze, orifice tube, and electrical tape at auto zone.
      20.75 at pull-a-part for new fans and intake elbow.
      5 for chip (not including the cost of the burner. its a tool.)
      6.99 for JB weld stick

      grand total: 2832.53
      other stuff that was used, i had on the shelf. like to make the air intake setup. i had to buy the elbow. its off some 90's FWD GM product. not sure what, but it looked right down at pull-a-part. the air filter was given to me by a friend that got it with a parts car. the 3 inch exhaust tubing was leftover from putting a dynomax exhaust on the Dakota.
      wire for the fans, and the two factory relays are from my wiring box.
      i reused the stock radiator hoses, as they were in good shape, and i cut them to fit.
      the JB weld has yet to leak on the pan.


      Ive spent the last couple of weeks getting the few tricky parts figured out.
      1. making the wiring look good. that was a PITA, but I'm glad i took the time. looks almost factory. its actually a little too clean to be factory.
      2. cooling. i wanted to use dual fans, pretty much because my PCM can control them. i read on an S10 forum somewhere that a 94-04 intrepid dual fan setup fits perfectly. so i got one from a 95. dual speed fans, fan controller, everything. well, it doesn't fit worth a crap. the fans hang over both radiator tanks. and after spending 20 bucks and a Saturday, i made them work. uglier than homemade sin, but functional. maybe someday, ill find something that fits better.
      3. air intake. i thought the factory fire bird setup would fit. well, it did, but very, very badly. so i tried one of the rubber plumbing elbows that Lowe's sells. that fit even worse. i tried putting the air filter directly on the throttle body. no go. finally, walking through pull-a-part, i noticed an elbow off of a 90 something GM FWD V6 product. i got it. was a little large (like 3.5 inch), so i cut up an old inner tube to make some rubber spacers. got the inner tube for free from a local tire shop (Freeman's tire in albemarle), and used a little electrical tape to hold it in place. worked like a charm. drilled a hole in the side for my breather tube, and stuck my IAT at the other end in the air filter. 3 inch exhaust tubing is the metal.
      4. throttle cable. i used one from a 2nd gen, CPI blazer. at full depression of the throttle pedal, the throttle blade was only opening about a quarter of the way. so i cut the factory pedal end off, and used a cable end from my BMX days to reattach it. just shortened it up, pretty much. used a washer as well. if anyone ever asks, ill take a picture.

      the 92 inner fenders and core support went in without a hitch. grille is actually attached properly for the first time,and my headlights are now properly adjustable.

      here's pics before the first test drive:





      see the funky heater hose and fan setup? best i can do for right now. maybe when work gets a little better.....


      anyway, i had a guy i know write a computer program for it. that didn't work so well. so were going back to the drawing board on that one. i test drove it on the stock lumina software today. has a low idle now that its getting warmed up. also, has a nasty bog off idle on either chip. I'm thinking vacuum leak.
      drove it around the block. in first and second, shes a lot peppier, even running pig rich with no timing. pretty fun, to be honest. got home, was planning on trying to find the "vacuum leak" before supper. blew the lower radiator hose off the water pump right in front of the garage. apparently, i missed the metal outlet of the housing with the hose clamp, and only tightened it to the hose itself. so, Ive gotta clean that up and add some more coolant before i take it back out.

      bu that's my update.
      michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    14. #174
      Join Date
      Dec 2005
      Location
      Birmingham, AL
      Posts
      3,355
      Country Flag: United States
      You're right, the wiring job looks great. Glad that it is getting close to being back on the road in full force.
      Stephen

    15. #175
      Join Date
      May 2006
      Location
      Rhode Island
      Posts
      675
      Country Flag: United States
      great project thread!!
      Rene P.

      My 1968 firebird build thread--->https://www.pro-touring.com/showthre...rd-on-a-budget

    16. #176
      Join Date
      Aug 2007
      Location
      Normal, IL
      Posts
      259
      Keep up the work, love the project!

    17. #177
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      well, I've got my laptop issues on the way to being solved. had a bad chip burner, and the radio shack usb converter wouldn't accept the baud rate of my ALDL from the 7727.

      the hypertech adapter that i score for free was also giving me some trouble. bad solder joints around where the prom goes in. so i wound up re-soldering it.

      my first tune didn't go so well. would run when you let the clutch out. so i started over again from scratch. used a .bin from a 92 J-body 5 speed. changed the EGR settings to disable the EGR entirely. removed the speed limiter. set the fans to come on when i wanted them to, not a 220F.

      put about 150 miles on it in the last few days. it runs pretty good. not as strong as it did with the automatic lumina bin, but more consistently and smoother. kind of surges at light throttle highway cruise. also cut out on me on the way home tonight.
      i found a couple of issues that need to be addressed soon.

      1. no AC, black truck, and 96 degree day.
      2. My battery tray broke, and is only held in by one leg now. need to make a new one. dad had enough scrap that i can start fabbing it.
      3. the aforementioned drivability issues.
      i also finished getting the oil pressure gauge and speedometer functional again. tucked up the interior wiring, finished fixing some of the dash stuff as well. nothing picture worthy.

      i do have to say that overall I'm pretty pleased with the swap. good power, good throttle response, and seems like decent fuel economy.
      she'll actually lay you back in the seat now. feels like you actually have enough power to pass somebody.

      so, I'm going to keep tuning. and see if i can get my damn laptop to communicate with the ALDL stream. as well as find somebody local that can make me my AC hoses. its getting too hot down here.

      michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    18. #178
      Join Date
      Mar 2009
      Location
      Southern Maryland
      Posts
      402
      Quote Originally Posted by dusterbd13 View Post
      well, if i can do any more to help you have more ideas, let me know.

      thank you for letting me inspire you.
      Got my build thread started, check it out, it should look pretty familiar;

      https://www.pro-touring.com/forum/sh...ad.php?t=69515

    19. #179
      Join Date
      Jan 2006
      Location
      McKinney, TX
      Posts
      1,623
      Country Flag: United States
      Anything lately? I will be getting a FREEBIE 95 S-Dime 4cyl/5speed that I already have parts and plans for. I'm excited and reading through this makes it worse.
      66 Mustang "Project: Ballin on a budget"
      89 Mustang "Box Wine"

    20. #180
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      got my AC hoses made (not installed), orderd long tubes (not installed) tuned some more, and put over 1500miles on it.

      power steering leak turned into ruptured hose, turned into dead pump. currently parked while i do customer cars.

      in the past three weeks, ive almost completely wired a 50 new yorker convertable, done a motor swap and various other things to a CRX, nodified the oil cooler on a C6 vette, and stuff im forgetting. been really busy. when i catch up some more, ill do some more work to the truck.

      congrats on the score. whats the plans?
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    Page 9 of 11 FirstFirst ... 4 5 6 7 8 9 10 11 LastLast



    Advertise on Pro-Touring.com