Results 1 to 8 of 8
Thread: Where do you get your tips?
-
04-20-2010 #1
Registered User
- Join Date
- Oct 2007
- Posts
- 68
Where do you get your tips?
I wanted to re-route my exhaust out the sides of my car and am looking for a tip that is more flat and square then round so that I can tuck it up close to the body and not have it hang down low. Sort of like this type but would have it in black and maybe a little longer and more square instead of getting taller at the end:
~Jon~1998 "Sinister Stang"
Mods: True dual exhaust, UDPs, CAI, H&R SS springs, Tokico HP blue shocks, MM CC plates, Polyurethane isolators, Steeda bumpsteer kit, custom bodywork, A.R. 17x9 Rebels with BFG rubber, drilled and slotted rotors, high performance pads and fluid, SS brake lines.
Next: Bodywork and paint.
-
04-20-2010 #2
Registered User
- Join Date
- Jan 2007
- Location
- Gilbert, AZ
- Posts
- 199
Not sure where people buy them. I just search on google for exhaust tips.
http://www.autobarn.net/vibrant-exhaust-square.html
Found these though. Is this more like it? its a Late 80's - early 90's Corvette style, or Silverado SS styleTravis
1968 Mustang Coupe WideBody
1968 Barracuda Formula S Sold 10/10/10
My Barracuda.
It's more than just an old car,
It's my one freedom.
-
04-21-2010 #3
Registered User
- Join Date
- Oct 2007
- Posts
- 68
I've seen those ones. I'm looking for some that are similiar to the ones that are run on racecars. I think that baby blue pro-touring nova had the ones that I'm trying to get. I'll have to see if I can find a pic of them.
~Jon~1998 "Sinister Stang"
Mods: True dual exhaust, UDPs, CAI, H&R SS springs, Tokico HP blue shocks, MM CC plates, Polyurethane isolators, Steeda bumpsteer kit, custom bodywork, A.R. 17x9 Rebels with BFG rubber, drilled and slotted rotors, high performance pads and fluid, SS brake lines.
Next: Bodywork and paint.
-
04-21-2010 #4
Registered User
- Join Date
- Oct 2007
- Posts
- 68
These are what I'm looking for. I think these were hand made but I was curious if anyone knows where I can find them if they are not.
~Jon~
1998 "Sinister Stang"
Mods: True dual exhaust, UDPs, CAI, H&R SS springs, Tokico HP blue shocks, MM CC plates, Polyurethane isolators, Steeda bumpsteer kit, custom bodywork, A.R. 17x9 Rebels with BFG rubber, drilled and slotted rotors, high performance pads and fluid, SS brake lines.
Next: Bodywork and paint.
-
04-21-2010 #5
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
something like this?
http://cgi.ebay.com/ebaymotors/COMPL...Q5fCarQ5fParts
search ebay for "nascar exhaust"....1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
04-21-2010 #6
Registered User
- Join Date
- Oct 2007
- Posts
- 68
Thats the race car that has them! Damn I must really be having a hell of a day if I can't remember that! Thanks
~Jon~1998 "Sinister Stang"
Mods: True dual exhaust, UDPs, CAI, H&R SS springs, Tokico HP blue shocks, MM CC plates, Polyurethane isolators, Steeda bumpsteer kit, custom bodywork, A.R. 17x9 Rebels with BFG rubber, drilled and slotted rotors, high performance pads and fluid, SS brake lines.
Next: Bodywork and paint.
-
04-22-2010 #7
Registered User
- Join Date
- Aug 2004
- Location
- Melbourne, FL
- Posts
- 1,046
Dr. Gas makes them. They are called boom tubes. You can usually find good deals on used ones from NASCAR teams on eBay as mentioned in a previous post.
67 Firebird Convert 455 +.060 Johnny Winters TH400 74cc KRE d-port flowed @ 310 cfm heads piston dished 16cc H-beam rods Comp Cam 305-AH-8 cam 108* LSA 253/260 @.050 duration .577/.594 lift w/1.65 rockers Ford 9" 3.55 Detroit Locker M/T Sportsman Radials 31x18x15 on Convo Pro 15x15s
Honest dad that 455 on the side of the block is a serial number
-
04-22-2010 #8
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Those are Dr. Gas' in that ebay link that I provided earlier.
Originally Posted by 67 455 Bird ragtop
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
Reply With Quote
