Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Jan 2010
      Location
      arkansas
      Posts
      5

      96 formula headed for scrap

      My project being the lt1 and t56 out of this donor 96 into my 69 I was wondering if any or all the braking system could be used on my 69 before it goes over the scales

    2. #2
      Join Date
      May 2002
      Location
      Northern California
      Posts
      10,716
      Country Flag: United States
      ahh you can do better. them calipers suck.

      grab the rear sway bar and master/booster maybe?

      vince
      MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε


    3. #3
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      MC works. booster can be made to work. Beyond that, I wouldn't touch anything else on the brakes except maybe the ebrake setup. I didn't
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    4. #4
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Grab the rear brakes...you can certainly do better, but they're worth some money if you opt to sell them versus run them. They are essentially what Touring Classics used to sell and Baer still sells as their rear "Track" kits.

      If you grab the MC/booster, be sure to grab the metric tube nuts to go with the MC.

      Tobin
      KORE3
      It's what I does.

    5. #5
      Join Date
      Jan 2010
      Location
      arkansas
      Posts
      5
      so the front discs will not work? thanks for the info



    6. #6
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      They are crappy. Trust me. I put 117k miles on my formula before I totaled it. I ran Hawk HPS pads just so that the brakes would be adequate in the rain and work ok in the dry. They are too small and don't have enough clamping force for a mid 3k pound car that's going to be driven in a performance manner. You can do better easily.

      If you elect not to take the MC and the line nuts are good, I'll take the line nuts going into the MC off your hands. PM me if you want.

      Thanks
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    7. #7
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Quote Originally Posted by shawn65 View Post
      so the front discs will not work? thanks for the info
      That is correct. There is nothing about the front calipers, pads or rotors that makes them worth anything more than scrap value. If the unitized hubs are in good condition, you could possibly sell those to someone with a 4th-gen as they tend to wear out rather quickly when driven hard. If they already have near or over .012" axial runnout, they're toast and not worth anything.

      Tobin
      KORE3
      It's what I does.




    Advertise on Pro-Touring.com