Revised Arizen Racing Sports seat coming soon

[arizen]

Will the new seats have matching rear covers as well?

Yes. The least expensive way to do the complete interior is to have us make our seats to match the rear covers from PUI. They are the largest reproduction upholstery maker and most Camaro websites are selling their covers. We can order the rear cover for you if needed.

For those who want something custom, not stock, (leather, suede, 2-tones, etc.) we can make the rear cover as well.

[41565 chevelle]

What is the chance of getting lower backed seats?

[arizen]

What is the chance of getting lower backed seats?

We may look into it in the future but for now all our seats are tall enough to have a racing harness cutout if needed.

We can buy seats like the ones below but if custom upholstery was needed they would be more expensive than our own models.

[arizen]

We may look into it in the future but for now all our seats are tall enough to have a racing harness cutout if needed.

We can buy seats like the ones below but if custom upholstery was needed they would be more expensive than our own models.

If we get at least 3 people interested in this lower back seat, I can look into having a pattern made for those who require custom upholstery. So if you like this model, spread the word and find 2 others. The seat comes standard in some vinyl or velour colors.

[theYman]

Will the new seats have matching rear covers as well?

I going to be redoing my interior and would be interested in the new seats with harness openings. As well as the seat adapters for a 69 Camaro and matching rear seat covers.

As far as color goes I see this picture on your site:


I have a Lemans Blue 69 RS with white interior that I think I'd like to change to either a blue or black, is the black with blue inlay an still an available color option?

Is this a stock available set of sets? Will it fit a 69 firebird?

[arizen]

Is this a stock available set of sets? Will it fit a 69 firebird?

We make seats to order according to upholstery desired. We are out of stock on frames and foam until about the 3rd week in February. The new seats are different from the blue/black 2-tone seat in this photo. They will be like the seat below; with or without harness holes. We can make them in whatever colors, material or stitching pattern is needed. They will fit in a 69 Firebird.

[larknut]

What is the overall height of the seat back?

[arizen]

What is the overall height of the seat back?

The seat is 36" tall. It is about 1" taller than Larry's below; and also about 1" wider in the shoulders and across the seat bottom.

[The WidowMaker]

are there any plans to design a seat that incoporates a shoulder belt for a 3 or 4 pt harness? most older cars require using an aftermarket setup that bolts to the roof when not running a cage, but its looks leave a lot to be desired. my silverado has a similar setup like im referring to. since none of us should be stupid enough to drive the cars with just lap belts, another option would be nice.

Tim

[The WidowMaker]

here is an example..... obviously not this style, but it is possible.

[arizen]

are there any plans to design a seat that incoporates a shoulder belt for a 3 or 4 pt harness? most older cars require using an aftermarket setup that bolts to the roof when not running a cage, but its looks leave a lot to be desired. my silverado has a similar setup like im referring to. since none of us should be stupid enough to drive the cars with just lap belts, another option would be nice.

Tim

Tim,

We have no plans to have a seat built with an integrated seat belt. If you do that, your seat becomes part of the safety/restraint system in the car and you take on tremendous liability. We try to give the customer the option on using the stock restraint system that came in the car or a racing harness but have neither actually part of the seat itself.

Mark

[The WidowMaker]

thanks for the response. i guess thats why i cant find one. they would require a lot more than just bolting to a stock sheetmetal floor.

Tim

[arizen]

Here are pictures of the new 69 Houndstooth seats. We are taking orders now and seats will take about 3 weeks to produce. Comfortweave uses the same pattern and will be offered as well. Whatever else you need, just email or pm me for a quote. They will normally have a harness slot in the headrest but can be made solid like the pictures.

[arizen]

Here are pictures of the new 69 Houndstooth seats. We are taking orders now and seats will take about 3 weeks to produce. Comfortweave uses the same pattern and will be offered as well. Whatever else you need, just email or pm me for a quote. They will normally have a harness slot in the headrest but can be made solid like the pictures.

For those considering custom upholstered seats, we will have one black cloth seat we will use to ship out for test fit purposes. This can help people decide who are unsure if they fit comfortably in this model. You must be willing to pay all shipping charges in both directions. This model is 1" wider in the shoulders and thigh area than the seat Larry has but just as tight in the lower back.

[arizen]

Can someone please tell me the height of the factory seat from the floor on 1967-1969 Camaro/Firebird? We are trying to determine if a taller bracket will be needed for some drivers? Please try to get the height in the same area as our photo.

[arizen]

Here are a couple of pictures of our ST2 69 Camaro Comfortweave seats.

[arizen]

What is the overall height of the seat back?

We will be offering soon a shortened headrest on the ST2 seat. The overall seat height will be about 2 1/4" less, approximately 33 3/4". We should be making the first set with this modification shortly and will take pictures.

[larknut]

We will be offering soon a shortened headrest on the ST2 seat. The overall seat height will be about 2 1/4" less, approximately 33 3/4". We should be making the first set with this modification shortly and will take pictures.

This I like to hear.

[1969CamaroRS]

Question - Any issues with using stock seat belts or say Morris Classic 3 point belts on the front seats?

Thanks!

[arizen]

Question - Any issues with using stock seat belts or say Morris Classic 3 point belts on the front seats?

Thanks!

Not that I am aware of.