Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6

    Thread: injector boss

    1. #1
      Join Date
      Jul 2008
      Location
      Strasbourg, France
      Posts
      143
      Country Flag: France

      injector boss

      Hello
      I have the edelbrock 7137 EFI intake manifold for my 383 SBC.
      Should I remove the injector boss in the intake casting to improve air flow:

      Or are they here for a good reason? (fuel atomisation?...)

      Here a picture of the intake put on the engine:



      What would you do?
      Guillaume

    2. #2
      Join Date
      Jan 2009
      Posts
      197
      I would leave it alone. It is there to provide a smooth transition past the injector and to prevent flow separation. The only reason I might consider the removal is if the heads are ported and you need to match them.

      Cool intake by the way!

    3. #3
      Join Date
      Jun 2001
      Location
      Newbury Park, CA
      Posts
      5,839
      Country Flag: United States
      The bulk of the airflow is on the port floor so trimming a small amount away on the roof will have minimal effect.
      VaporWorx. We Give You Gas http://www.vaporworx.com

    4. #4
      Join Date
      Jun 2005
      Posts
      467
      My Holley is similar and I took the time to remove the excess metal and smooth the area. IIRC, Doug Flynn said they saw modest gains when doing the same thing.

      Jim
      Don't take a knife to a gunfight.

      Half-Assed = Half-Fast

    5. #5
      Join Date
      Jul 2008
      Location
      Strasbourg, France
      Posts
      143
      Country Flag: France
      Thank you



      I will let it like that for the moment, it would take too much time to make it properly an I still have a lot of things to finish before the Spring.
      Anyway, the turbocharger will help air getting in the engine, even if the intake is not ported.

    6. #6
      Join Date
      Jan 2009
      Posts
      197
      Quote Originally Posted by gui67 View Post
      Thank you

      I will let it like that for the moment, it would take too much time to make it properly an I still have a lot of things to finish before the Spring.
      Anyway, the turbocharger will help air getting in the engine, even if the intake is not ported.
      If you are going to turbocharge it then I think the effect will be quite negligible either way. There's nothing quite like forced induction to negate the small stuff.




    Advertise on Pro-Touring.com