Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 15 of 15
    1. #1
      Join Date
      Feb 2005
      Location
      Indianapolis, Indiana
      Posts
      337
      Country Flag: United States

      Quick time Bellhousing info needed

      Anyone using a Quicktime RM-8072 bellhousing? Care to comment on its fit? I am looking into getting one or my project. This is for the install of a LS-1 T56 behind a BOP motor in case anyone is interested.

      http://www.quicktimeinc.com/products.html#olds
      Ben Mowery

      67 Firebird -Powered by Pontiac w/ RAM AIR V.

    2. #2
      Join Date
      Jan 2005
      Location
      Boonville, Missouri
      Posts
      924
      Excellent product from an excellent company. You will find that the run out of this bell housing is in far less than other SFI rated units on the market. If you have any questions try calling Ross at Quicktime. He's a nice guy and will talk you through any concerns. I recommend them and we sell them with some of our kits.
      Tony Edler
      Illumin8s
      See Illumin8s at www.illumin8s.com

      '73 Dodge Challenger

    3. #3
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      I'm using an RM-8070, for a TKO behind a Poncho standard block - so slightly differnet. But, the alignment was excellent, it's a nice form factor, and the quality was great. I'll also second the comments about Ross. I had a couple questions and he was helpful and accurate.

    4. #4
      Join Date
      Mar 2005
      Location
      Ont Canada
      Posts
      140
      Country Flag: Canada
      Dumb question time... Why do you need to install the supplied engine plate? What is it for? Sorry ti hi-jack your thread.



    5. #5
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by oldzzy View Post
      Dumb question time... Why do you need to install the supplied engine plate? What is it for? Sorry ti hi-jack your thread.
      In the event of a catastrophic failure it's designed to keep nasty stuff from going thrugh the back of the block. And, it's an SFI requirement if you're racing at any sanctioned events AFAIK.

    6. #6
      Join Date
      Aug 2006
      Location
      Houston, TX
      Posts
      103
      +1 on it being one of the best if not the best bellhousing you can get for these types of applications.

    7. #7
      Join Date
      May 2006
      Location
      Richmond VA
      Posts
      74
      In retrospect I half wish I would have use the QuickTime bell in place of the McLeod Modular bell for the T56/Pontiac V8 conversion. The McLeod is crazy heavy and the bolt holes to the block are poorly located, mandating allen head bolts to attach the bell to the block in 4 of 6 spots. However, be aware of the warning note with the QT Bell "Notes: Uses 166 tooth flywheel and no larger than 10.5 in. clutch." I like at least a 11" clutch for a serious performance vehicles myself, though suppose a very good 10.5 could work too in the right application. Maybe the tight bolt clearance is what lets the McLeod take a larger clutch?
      66 GTO: The Palette...The paint: E-heads, 428/440CID, Headers by Ed & 3" x-pype, T56 6 speed trans, 12 bolt posi with 4.56's. 17" Rocket Racing Booster wheels and 245/45/17 and 255/45/17 Nitto555 tires. C5/LS1 disc brake setup, hydroboost, Jeep GC fast ratio steering box. 1.25"/1" sway bars, adj Umi tubular rear LCAs, SC&C adj F uppers with Howe BJ's, 1" Eibach lowering springs...

      68 LeGTO Convert: first car!
      70 Cutlass Rallye 350: 54K orig mile survivor!
      73 International Scout II on 33's: daily driver
      78 Trans Am WS6/W72 Bandit Edition 4spd: The one that got away :(

    8. #8
      Join Date
      Feb 2005
      Location
      Waterloo, Ia
      Posts
      1,408
      Quote Originally Posted by Socrates View Post
      In retrospect I half wish I would have use the QuickTime bell in place of the McLeod Modular bell for the T56/Pontiac V8 conversion. The McLeod is crazy heavy and the bolt holes to the block are poorly located, mandating allen head bolts to attach the bell to the block in 4 of 6 spots. However, be aware of the warning note with the QT Bell "Notes: Uses 166 tooth flywheel and no larger than 10.5 in. clutch." I've like at least a 11" clutch for a serious performance vehicle, myself, though suppose a very good 10.5 could work too in the right application. Maybe the tight bolt clearance is what lets the McLeod take a larger clutch?
      I had the same allen bolt issue with my McLeod SBC scattersheild....
      -Nick
      -1967 GTO I drive and race
      -Build threads:
      -http://forums.maxperformanceinc.com/forums/showthread.php?t=615847&page=23
      -https://www.pro-touring.com/showthre...project-thread


    9. #9
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by Socrates View Post
      In retrospect I half wish I would have use the QuickTime bell in place of the McLeod Modular bell for the T56/Pontiac V8 conversion. The McLeod is crazy heavy and the bolt holes to the block are poorly located, mandating allen head bolts to attach the bell to the block in 4 of 6 spots. However, be aware of the warning note with the QT Bell "Notes: Uses 166 tooth flywheel and no larger than 10.5 in. clutch." I like at least a 11" clutch for a serious performance vehicles myself, though suppose a very good 10.5 could work too in the right application. Maybe the tight bolt clearance is what lets the McLeod take a larger clutch?
      That warning is no longer valid at least on the RM-8070. The documentation simply is not updated. According to QT, you can (and I do) use an 11" clutch with no issue whatsoever. QT keeps saying they're going to update the web site but they never seem to get around to it. Last year I had the same concerns and called QT myself which is when I was informed of the invalid warning.

    10. #10
      Join Date
      Feb 2005
      Location
      Indianapolis, Indiana
      Posts
      337
      Country Flag: United States
      You guys need to look again. Qt website say 11" clutch for the 8072. 8070 still says 10.5" clutch. My real concern is letting me install a T-56 without all the headache from adapters and sleeves and spacers.
      Ben Mowery

      67 Firebird -Powered by Pontiac w/ RAM AIR V.

    11. #11
      Join Date
      May 2006
      Location
      Richmond VA
      Posts
      74
      67bird, I don't think you'll be able to install any T56 in a 67 Firebird without the use of one sort of spacer or adapter or another. The QT bell will still require an adapter plate for the mechanical clutch stuff if you go that route, or a spacer plus other associated mods if using a hydraulic slave/CSC setup. If you know of a better way please share. I've spent quite a bit of time researching the Pontiac T56 install and could not figure a direct route. Maybe the new aftermarket TR6060 bolts right up and has room for a hyd. slave or has provisions in the front plate for the mechanical fork etc.? Did you see the Viper T56 to PMD V8 swap I posted in my 66 GTO? It might help give you some ideas...
      66 GTO: The Palette...The paint: E-heads, 428/440CID, Headers by Ed & 3" x-pype, T56 6 speed trans, 12 bolt posi with 4.56's. 17" Rocket Racing Booster wheels and 245/45/17 and 255/45/17 Nitto555 tires. C5/LS1 disc brake setup, hydroboost, Jeep GC fast ratio steering box. 1.25"/1" sway bars, adj Umi tubular rear LCAs, SC&C adj F uppers with Howe BJ's, 1" Eibach lowering springs...

      68 LeGTO Convert: first car!
      70 Cutlass Rallye 350: 54K orig mile survivor!
      73 International Scout II on 33's: daily driver
      78 Trans Am WS6/W72 Bandit Edition 4spd: The one that got away :(

    12. #12
      Join Date
      Feb 2005
      Location
      Indianapolis, Indiana
      Posts
      337
      Country Flag: United States
      If I find anything out I will share. I haven't attempted myself. The point I was making is the Mcleod modular bell is basically a stack of plates to make something work to install a T-56 to a Pontiac. With the new bell, it is just that a bellhousing not a stck of plates to get it to bolt together.
      Ben Mowery

      67 Firebird -Powered by Pontiac w/ RAM AIR V.

    13. #13
      Join Date
      May 2006
      Location
      Richmond VA
      Posts
      74
      Quote Originally Posted by 67bird View Post
      If I find anything out I will share. I haven't attempted myself. The point I was making is the Mcleod modular bell is basically a stack of plates to make something work to install a T-56 to a Pontiac. With the new bell, it is just that a bellhousing not a stck of plates to get it to bolt together.
      The McLeod is not a "stack of plates" to fit the T56, it is in fact made primarily for the T56, and it takes a stack of plates for OTHER, primarily oddball transmissions combos to adapt, hence the "modular" status. Look more carefully at the McLeod website and catalogs, and read my install post to help clarify this for you if needed.

      I still don't see at all how you can use the QT bell without at least one adapter plate or spacer with any T56 model, that is, if you want a functioning clutch. If you just want a static display, that's another story, as both bells will bolt right up no problem, no spacer, no adapter, just bolts. Getting a functional throwout bearing inside either one, that's another story...

      Weir makes (or made?) a special BOP bell, although I think they to required the plate for the mechanical clutch bits and bobs, and it is just cast aluminum, not good SFI stuff...
      66 GTO: The Palette...The paint: E-heads, 428/440CID, Headers by Ed & 3" x-pype, T56 6 speed trans, 12 bolt posi with 4.56's. 17" Rocket Racing Booster wheels and 245/45/17 and 255/45/17 Nitto555 tires. C5/LS1 disc brake setup, hydroboost, Jeep GC fast ratio steering box. 1.25"/1" sway bars, adj Umi tubular rear LCAs, SC&C adj F uppers with Howe BJ's, 1" Eibach lowering springs...

      68 LeGTO Convert: first car!
      70 Cutlass Rallye 350: 54K orig mile survivor!
      73 International Scout II on 33's: daily driver
      78 Trans Am WS6/W72 Bandit Edition 4spd: The one that got away :(

    14. #14
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by 67bird View Post
      You guys need to look again. Qt website say 11" clutch for the 8072. 8070 still says 10.5" clutch. My real concern is letting me install a T-56 without all the headache from adapters and sleeves and spacers.
      And you need to read the earlier posts. I specifically said that they have not updated their web site, but that I personally contacted them and the RM-8070 supports 11" clutches. This is direct from QT. I can't speak for the RM-8072, nor about bolting up a T56. I can say that both from QT direct technical and engineering support (and from the fact that there is currently an 11" clutch between my Pontiac motor and my TKO600 using an RM-8070) that the RM-8070 supports larger than 10 1/2" clutches.

      QT needs to update their documentation and website. If you don't believe me simply call Ross at QT. It may take a day or so to talk personally to him but he has always called back and taken care of any questions.

    15. #15
      Join Date
      Feb 2005
      Location
      Indianapolis, Indiana
      Posts
      337
      Country Flag: United States
      whmjr-thx for info. That opens up other options if I find a good deal on a TKO. I will try to give them a call as I am not set on a T-56 yet.
      Socrates- I think you may have taken my post wrong. I asked a question about the bell itself. What it takes to finish the install with a T-56, I don't know. I will have to cross that bridge when I get there. The understanding I have from at least two swap companies it that with that belhousing the installation is simplified. I posted asking about the bell for that reason. My comment about rings, spacers, and sleeves was more directed at the Mcleod modular bell. I personally would rather have as few peices as possible in the assembly.
      Last edited by 67bird; 12-19-2009 at 06:40 PM. Reason: revised
      Ben Mowery

      67 Firebird -Powered by Pontiac w/ RAM AIR V.




    Advertise on Pro-Touring.com