Forgeline SO3P/SP3P request.

[Droolguy]

I am jumping on the deal for Forgelines...

I was just wondering if someone was running SO3P or SP3P and could send me some pictures so I can get an idea of what they look like on a car... I am probably buying the SO3P because they look a little more muscle-esq than the SP3Ps, but pictures of cars with the actual wheels always goes a long way.

They are going on a 66' GTO btw.

Thanks everyone.

P.S. DriverzInc already has my buisness, they have a good rep and so far the customer service has been excellent, just FYI to the other retailers out there.

[ProdigyCustoms]

Check out our website.

ProdigyCustoms.com

[ProdigyCustoms]

Here are the wheels on The Official pro Touring Car MotiV8r Prodigy Customs built for the owner of Pro-Touring.com. We had this Forgeline SO3P wheel designed with the groove especially for MotiV8r. Now it is available to everyone.


Up close, Matte Black Center, Chrome Lips, Diamond Groove


SP3P on our own Project Prodigy, Gloss Black Center, Chrome Lips, Diamond Cut


SP3P Upclose


With Fully Polished SP3Ps

[Droolguy]

Thanks a lot, its a big purchase and I really needed to see them on a classic car before pulling the trigger.

[JustinB]

William, you have come to the right place. We look forward to setting up your GTO will a killer deal on a new set of Forgelines.

[DriverzInc]

I am jumping on the deal for Forgelines...
P.S. DriverzInc already has my buisness, they have a good rep and so far the customer service has been excellent, just FYI to the other retailers out there.

Thanks man! Justin and I have been talking A LOT about your car, and we could not be more excited to be helping you with your GTO, and we can't wait to see the finished product after it is set up!!!

[muthstryker]

What sizes are you going to run?

[Droolguy]

Right now I we are looking at 18X8 front and 18X10 rear with 245/275s.

The dilemma coming up is we don't know if the 10 inch wide wheel will fit the stock wells.

[ProdigyCustoms]

The dilemma coming up is we don't know if the 10 inch wide wheel will fit the stock wells.

We are doing a 67 GTO Convertible in the shop right now. Had to go with 9s and 275s.

[JustinB]

The 9 is the "safer" fit with that year GTO. 10's are possible with the correct BS but none the less, they are a tight fit.

[muthstryker]

I came up with a way to get wider tires possibly in the rear with out touching the frame, although you would have to cut the inside wheel wells. But like justin said the 9 is a safer fit, I think the rear tubs are slightly different. Cant want to see this, we need more GTOs with some nice wheels thrown on them!

[DriverzInc]

The 9 is the "safer" fit with that year GTO. 10's are possible with the correct BS but none the less, they are a tight fit.

One thing I always tell customers too, is if you are going to run a 275 wide tire anyway, run it on a 9" as the tire bulge will look "correct" and bulge out nicley on the 9", like it belongs on a 9". The sidwalls tend to be more "square" on a 10" and can, at times, look stretched. Nitto's sidewall profile is better than most, so it looks okay, but they look at home on a 9", or 9.5", and if you are not too caught up with having to have the 10" in the rear, the 9" will do you better anyway. I think it might have something to do with the "keeping up with the Jones' mentality. "I have a 10 in the rear", but does it fit? That's the important thing.

On my 66, I was able to fit a 20x10 with a 285/30/20 but I had to roll the fenders, and pound in the inner wheel well a bit to make it work. If you are looking for the easy, slam dunk fit, the 9"-9.5 is the way to go, and it will still look great!

[ProdigyCustoms]

Live action shot.

As I mentioned, one of the cars were doing right now is getting wheels, Speedtech suspension, Wilwood brakes, new engne, bla, bla, bla!

Today we were mocking up the tires in the wheelwell. These are 19 X9" with 275 / 35 / 19 and BARELY fit! Maybe a half inch on each side at most.

We test fit 10s with 275s....no way!

[JustinB]

Aren't we putting a set of New Gen Fivehundreds 18x8/19x9's on that car?

[Droolguy]

So after hearing just how tight a 10" really is, I decided to move back to the 9.5" and just have them re-hooped later if/when we decide to minitub.

I am avoiding cutting on the car as much as possible.

[ProdigyCustoms]

I would be worried about a 9.5 also. A 9.5 will make the section width 3/10 wider, which would take the 1" of clearance to .70 clearance, which is about 3/8 per side!

Also, something else we are doing today is project planning with a member with a 66 GTO, and he measured his rear today and it is 1" more narrow then ours, and both are original rears. You will need to verify the width on your rear as there are 2 possible widths for those 66/67 GTOs. One is 1" wider then the other. With clearance so tight you will need to know exaclty which you have as the difference in the rear width would absorb half of the clearance with a 9" wheel.

Aint this fun!

[Droolguy]

Lol, I am in the middle of Iraq and don't have access to the car.

Gah, this is not an issue you want to run into with $1000+ a piece wheels.

[JustinB]

William, you came to the right place! Glad I could help. Thanks again for your order. Your build is going to be killer.

[Droolguy]

I hope so, we are sure putting enough money into it.

Going to shoot for a 65+mph slalom.