Minilite, Panasport, or V48 in 18"+ sizes yet?

[RYU]

I finally did the first long drive after the build and the rollers I have on there simply won't work. I know this gets asked every so often but does anyone out there make minilite type wheels in 18+ sizes yet?



I seem to remember Rushforth was working on something like this but haven't heard anything about it.

VWW


Panasport

[dipren443]

Superlite does.

http://www.superlite-wheels.com/wheelpage.asp?cat=2

[RYU]

ah right... yes.

those prices (+shipping) makes my head hurt. hopefully there's some competition here states side.

[dipren443]

ah right... yes.

those prices (+shipping) makes my head hurt. hopefully there's some competition here states side.

Yeah, the UK exchange rate blows...

Team III is supposedly working on 18" minilite reps. I am running theirs in 17". They are beautiful pieces.

[JustinB]

Got you covered! PM sent.

[dipren443]

Got you covered! PM sent.

Justin,

You can't come up with a response like that and not post for all to see.

Seriously though, what do you guys have in the works???

[Roger M]

[Roger M]

http://www.forgeline.com/press_media_article.php?nak=69&photo_key=242

[dipren443]

Those are great. Disappointing Forgeline wont make them for mass consumption. I am guessing Agent 47 will only do mustang fitment?

[RYU]

Roger,

If I remember that was on the matte black Mustang @ Sema for the gents that do the Rapid Protyping? That's exactly the look i'm hoping for or something similar.

[RYU]

yes, this one.

[Roger M]

I would be disspointed if these dont go into 'mass' production. I bet there is A Lot of interest in these due to the big resemblance to the original Minilites. The only problem I think would be cost for most people.

[RYU]

Seems a bit time consuming to mill those round center spokes. I'm sure these aren't cast alum.

Justin - wake up buddy we'd like some pics! lol

[JustinB]

So here is a little sneak peak into the new Lite wheel New Gen will be rolling out here shortly. The wheel is CNC machined forged 6061-t6 billet aluminum with all the finish options you guys have to come to expect! Sizes available from 17-22" diameter and 7-15" width!

[JustinB]

Here are a couple pics of a 19" raw center! Please keep in mind that these are not a finished product!

[RYU]

wow... i might be getting wood here so I hope you're not teasing. i'll work with you on pricing. budget is my next constraint.

[Merlin]

Are you taking deposit for the new wheels? I'll take a 18x9.5 & 18x11 size! I've been waiting for a long time for someone to make a mini-lite style wheel.

Cliff

[JustinB]

Cliff, absolutely! We are very excited about the new Lite wheel. As far as sizes go, as with most 2 piece billet wheels, .5" sizes are not available. We could do a 18x9 and 18x11 for you no problem. Just keep in mind the anything over a 10" wide hoop would require us to send the hoops out to be widened for you. Give me a call at the shop tomorrow and I will put some prices together for you.

[69496]

You guys will be filling a niche that has been missing. This will definetly be a great seller.

[DriverzInc]

I seem to remember Rushforth was working on something like this but haven't heard anything about it.

Yup! NewGen wheels is happy to debut our new "LITE" wheel. It is a rotary forged, 6061-T6 Billet aluminum wheel, available from 17"-22", in widths from 7" to 15", with HIGH caliper clearances built in to the wheel from .50" through 2.00". Bolt pattern possibilities include 4, 5, and 6 lug patterns!

The raw center Justin posted for you all is a 19" center, bound to be welded in a 19x12 hoop for a mini-tubbed Camaro. SWEET.

Finish options include Polished, Brushed, and powder coat.

New Gen wheels, is a partnership co. with Driverz Inc., and has nothing to do with Rushforth Wheels, or Jason Rushforth, but is a separate entity by itself.

We'll be posting again when the finish product is ready for photography and a formal press release, but we are ready to take deposits on orders NOW!