Results 1 to 6 of 6
Thread: 04-06 GTO rear seat question
-
10-13-2009 #1
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
04-06 GTO rear seat question
Can this set of back seats be made to work in a 70 camaro?
Not too worried about the front seats, many people have made those work.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
10-13-2009 #2
Registered User
- Join Date
- Sep 2009
- Location
- Corpus Christi, TX
- Posts
- 183
check out this thread
https://www.pro-touring.com/forum/sh...ad.php?t=56297
-
10-13-2009 #3
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Interesting....I didn't think about having to transition between the seat back and the rear package tray, but that makes sense.
Originally Posted by Capown
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
10-13-2009 #4
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Wow ...search is my friend...lots of info on these seats in here.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
10-17-2009 #5
Registered User
- Join Date
- May 2007
- Location
- Las Vegas
- Posts
- 670
I have a set for my 67 Chevelle and I think your 2nd Gen Camaro will need a shorter seat as well. I was thinking of having mine sectioned by an upholstery shop... something like the pic below...
Rich
1969 Camaro (in hibernation)
1972 K5 Blazer - LQ9, 4L80e, NP205, D60, AAM 14BFF => http://67-72chevytrucks.com/vboard/s...d.php?t=423432
10-17-2009 #6
Registered User
- Join Date
- May 2008
- Location
- SoCaL-Pico Rivera
- Posts
- 1,138
John I have some brackets for the front. they came with the seats I bought. below is the link where I bought the seats
https://www.pro-touring.com/forum/sh...ight=gto+seats---------Fabian Sanchez-----------
71 velle Project Syckness ATS,Rushforth wheels,PRRC, Autometer,UMI, Hotchkis,QA1,hood-latches.com, comp cams,
https://www.pro-touring.com/forum/sh...ad.php?t=43881
Reply With Quote
