Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14
    1. #1
      Join Date
      Mar 2006
      Location
      Buffalo N.Y.
      Posts
      209

      Basic Bondo question guys...new @ this

      Hey guys I'm new at this body work stuff and have a basic question.
      Ok um...I have finished welding 16g panel for my smotth firewall project and am very close to the bondo step. QUESTION- Should I bondo over the bare metal first or prime everything first then bondo?
      Heres a quick pic. My cat is inspecting my work..!!
      Jeoff J.
      Buffalo, NY
      69 Camaro convertible ~ 350ci. ~ T56

      To all u guys with the knowledge.
      My Ride: http://community.webshots.com/user/yukongt

    2. #2
      Join Date
      Dec 2007
      Location
      norman ok
      Posts
      387
      Country Flag: United States
      i would go right over the metal after its ground unless its going to be like this outside for a while...you could put an epoxy like they do after sand blasting but i dont think you need to. i would prime and paint the inside if there is any burn through from welding

    3. #3
      Join Date
      Aug 2004
      Location
      Atoka, TN
      Posts
      131
      I'll second that. It sticks best to bare metal.

    4. #4
      Join Date
      Dec 2004
      Location
      Midwest
      Posts
      2,265
      Country Flag: United States
      You may want to rough the bare metal with a sander before filler.. give it some "teeth" to grab. Some guys like to run as rough as 36 grit if doing the whole panel, others 50... 80 seems to do more "polishing" than scuffing.
      Kevin Oeste
      V8 Speed and Resto Shop
      V8TV
      Muscle Car Of The Week
      V8 Radio Podcast

      All about us:
      https://www.v8speedshop.com


    5. #5
      Join Date
      Mar 2006
      Location
      Buffalo N.Y.
      Posts
      209
      I posted this over at TC also and between them and you guys PLUS reading all kinds of archive threads it's a 50/50 toss up..!!! some say ruff bare metal some say etching primer some say epoxy primer. some say a WATERPROOF filler like "allmetal" on first coat of filler.
      I don't know what to do..!!
      Jeoff J.
      Buffalo, NY
      69 Camaro convertible ~ 350ci. ~ T56

      To all u guys with the knowledge.
      My Ride: http://community.webshots.com/user/yukongt

    6. #6
      Join Date
      Jul 2006
      Location
      Phoenix
      Posts
      467
      I'm in phoenix and put bondo right over bare metal on my car, which I did with a friend who's a 20 year body man and repairs Ferraris, Rolls, Bentley's, etc. The newest thing is epoxy primer first, then bondo, then another coat of epoxy primer. This is supposed to give best corrosion protection. You're in NY, higher corrosion, probably the new way is best for you but epoxy primer is expensive. On the other hand, most of these cars we build don't see harsh weather and certainly not salt so the original method of bondo over bare metal is find for most.

      Just my .02 worth!

    7. #7
      Join Date
      Mar 2006
      Location
      Buffalo N.Y.
      Posts
      209
      Thanks erik, Thats kinda the answer I needed. Your right my car doesn't even see rain let alone salt and $ is an issue. i am going to have it painted "hopefully" next year provided the funds so I will be having a pro do it. For now I'm painting the eng. conpartment to match the outside. I put alot of work rebuilding the eng, and making it nice on the eyes and didn't want to stick it in a crappy looking eng. conpartment.
      Jeoff J.
      Buffalo, NY
      69 Camaro convertible ~ 350ci. ~ T56

      To all u guys with the knowledge.
      My Ride: http://community.webshots.com/user/yukongt

    8. #8
      Join Date
      Jan 2008
      Location
      Ca
      Posts
      168
      Nobody recommended kitty hair filler? Must have been too easy.



    9. #9
      Join Date
      Oct 2005
      Location
      Odessa mo.
      Posts
      925
      Country Flag: United States
      Quote Originally Posted by poormans69 View Post
      Nobody recommended kitty hair filler? Must have been too easy.
      No it's to much trouble to catch and skin the neighbors cat.

    10. #10
      Join Date
      Apr 2008
      Location
      Anaheim, Ca
      Posts
      99
      Take a look at this if you haven't seen it.

      http://autobodystore.com/filler_&_epoxy.shtml
      Kenneth N.

      1969 Mercury Cougar XR-7 Boss 429 clone under construction

    11. #11
      Join Date
      Aug 2006
      Location
      Belforest, AL
      Posts
      1,092
      Quote Originally Posted by Declawed69 View Post
      Take a look at this if you haven't seen it.

      http://autobodystore.com/filler_&_epoxy.shtml
      There are too many flaws for that to be a legitimate test..
      Todd S.

      "I like to race school buses..."

    12. #12
      Join Date
      Apr 2005
      Location
      dayton, oh
      Posts
      952
      Southern Polyurethanes has 2 gallons of epoxy for less than $150 (it's 1:1 with activator). for me, it's worth the extra insurance.
      dave.t
      86 Olds 442 - Project If It Ain't Broke, Take It Apart and Fix It
      74 Javelin AMX - stocker

    13. #13
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      I did the epoxy over bare metal route. SPI is some really nice stuff. JR


      Started with a total stripping of the paint and body filler, down to shiny metal. Some hammer and dolly work along with some welding. Epoxy. Then body filler and glazing putty and a LOT of sanding. Then another coat of epoxy to seal the filler and some sand through spots. Then three coats of high build 2K primer. Block sanding forever. And finally today, three coats of epoxy. All SPI products. Good stuff.

      Now she will sit in epoxy for maybe a year while I work out some details. Like proper door and fender alignment. Final engine bay work. Stitch up the loose wiring. And focus on the interior.



      After the stripping with a D/A and 80 grit paper. A lot of paper LOL






      After the SPI high build primer. I forgot to shoot some pics of the epoxy over bare metal, but its there under the HB primer.





      After the dry guide coat





      This is a shot of the block sanding process. The stuff in a buff color has been blocked down. Took three weeks to block sand the guide coat off. Little pressure and LOTS of paper changes...



      And then today. The final coat of epoxy.. This was about five hours after spraying. Im gonna put the car out on the driveway tomorrow to make sure to bake out any solvents. Gonna be HOT here tomorrow...










    14. #14
      Join Date
      Apr 2008
      Posts
      13
      Looking good!!




    Advertise on Pro-Touring.com