Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 21
    1. #1
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269

      Dodge Durango Watts link?

      TOnight I was behind a Dodge Durango and saw what looked like a watts link. Did they come stock this way? The vehicle looked stock. If so this could be a good way to get a watts link cheap.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse

    2. #2
      Join Date
      Aug 2006
      Location
      Belforest, AL
      Posts
      1,092
      Yes.
      Todd S.

      "I like to race school buses..."

    3. #3
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      anyone have pics of this? what years? im interested, i have a 98 dakota that im going to build a 3 link for. its got 275 tires on all four. a bolt on watts would be sick and time saving

    4. #4
      Join Date
      Mar 2005
      Location
      Loganville, GA
      Posts
      931
      Country Flag: United States
      It should be the the 05 and newer models, earlier had leafs still.
      2018 Cruze LT Hatchback
      2003 Suburban 2500 8.1L
      1975 MGB Roadster
      2003 GSX750F Katana

    5. #5
      Join Date
      Jul 2008
      Location
      Dallas, TX
      Posts
      260
      Im betting you'd spend more time/effort trying to make that work on a car (on a similar truck maybe easy?) then just building one.
      '69 Chevelle - LQ4/T56
      '71 GMC SWB Fleetside - LM7/AR5

    6. #6
      Join Date
      Aug 2004
      Location
      Red Deer, Alberta, Canada
      Posts
      1,364
      Country Flag: Canada
      From Dodge's website.

      Matt
      72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
      Instagram: Cst_koon

    7. #7
      Join Date
      Apr 2006
      Location
      Coronado, CA
      Posts
      1,688
      Country Flag: United States
      It was a selling point for me when I bought our new Chrysler Aspen.
      With the Hemi and the suspension it is a really good driving vehicle. Brakes suck a$$ though. 20-22 mpg aint bad for a full size SUV going 70mph either.
      Johnny C.
      -----------------------------------------------------------------------------------------------------------
      70 'cuda, Pro-Charged 408 stroker, Tremec 5 speed, Strange S-60, Alter-k-tion, Tri 4, Hydroboost and Wilwoods

    8. #8
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Yeah, I looked at a few different stock watts link setups, trying to see if it was gonna be easier, or less expensive to adapt a ready made unit. I ended up buying the DOM tubing and ends along with some rod ends and making my own. The cost was around 500 for the complete unit. Thats with a Fayes center pivot. And to be honest, if it wasnt so much of a tight fit I would have just bought the fayes kit for what is it now, 700? JR

    9. #9
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      I would think the Durango setup would be way too big for most cars. I'd just fab up my own setup.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    10. #10
      Join Date
      Oct 2005
      Location
      Jasper,IN
      Posts
      540
      The Mercury Marauders had a really cool Watt's link setup too. It was actually attached to the top of the diff.
      Attached Images Attached Images    

    11. #11
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Quote Originally Posted by darren@ridetech View Post
      The Mercury Marauders had a really cool Watt's link setup too. It was actually attached to the top of the diff.
      Geez, that's a high RC!
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    12. #12
      Join Date
      Jun 2008
      Location
      green bay wisconsin
      Posts
      111
      Country Flag: United States
      I just saw a Durango yesterday and noticed it had a watts link....thought it was interesting for sure.

    13. #13
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      THe PT cruiser has a watts on it solid rear axle.

      Some aftermarkets have good ideas, but whats with the high roll center?

    14. #14
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      I looked into alot of cars that had the watts link as production pieces, looking to scavenge the parts. The only parts that were usable was the center link, and really thats all I was looking for. The rest of the parts, the arms and arm links were too long or too short.

      So it was easier to buy some DOM tube and some weld in ends to make the link bars, along with some rod ends and yer set.

      The difficult piece is the center pivot so thats what I was scrounging for. But for the money that the scrappies were looking to get for the center link it was a wash to just buy one from Tim at Fayes.

      Most of the production pieces you would buy from the scrap yard are gonna need to be ditched anyway. The arm lengths arent gonna be right. Steel is cheap, make the link arms and get the pivot from any source you can. Or make the center pivot.

      I bought all the stuff to make the center minus the bearings and was ready to make it till I saw Tim would sell me the center.

      And Ill be honest. I have a couple of CNC mills that could make the center but by the time I drew it up, and stuffed the numbers into the machine I would be behind the game. There are a couple of part changes that need to take place and it was profitable for me to just buy the part. One phone call took the set up time out of it. Ok, Im lazy, I just didnt wanna do the snap rig groove LOL .. JR

    15. #15
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      how much is tim selling the center pivot for?



      instead of DOM, I am going to use tapped aluminum tubing, Left hand right hand thread and is only about $20 a tube.


    16. #16
      Join Date
      Mar 2008
      Posts
      952
      Quote Originally Posted by darren@ridetech View Post
      The Mercury Marauders had a really cool Watt's link setup too. It was actually attached to the top of the diff.
      if the Marauders had it, then that means that the Crown Vickies had it, too.
      should be able to stumble across a few Vickies in the junkyards if one wanted to try to make that work..

    17. #17
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      I think the mercs were different, an upgraded version of the vic. Just like the marauder got the 4 valve motor.

    18. #18
      Join Date
      Mar 2008
      Posts
      952
      i thought the Marauder was just a Marquis with the Crown Vickie suspension and big wheels (like the Impala SS was just a lowered 9C1 Caprice with leather seats and 17" wheels) and the DOHC motor out of the mustang Cobra?

    19. #19
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Quote Originally Posted by falcon65 View Post
      how much is tim selling the center pivot for?

      instead of DOM, I am going to use tapped aluminum tubing, Left hand right hand thread and is only about $20 a tube.
      I think it was like 60 bucks, not bad for the unit, thats bearings and all, and he is good for some technical advice too. Willing to talk about your specific needs.

      And the threaded aluminum bar will work fine, just make sure you have enough threads engaged. I used QA1 rod ends, they really are top of the line and the cost is similar to some of the off shore ends. And dont forget some anti seize on the threads, aluminum and steel threads dont like each other. Or actually they like each other too much, they can weld themselves together.

      Remember, there is ALOT of pressure applied to the watts link. It has to take all the side loads of the car. Make it stout enough. And it is a simple loading affair, pretty straight loads (no side loads) on the links which is good. But the center pivot takes it all, in a big way. The major stress point is gonna be the center pivot bolt. I used a 180K PSI, 3/4" bolt. You wont find that at yer local hardware store. And the grade 8 bolts at the hardware store are iffy. I have searched high and low for some good fasteners. Fastenel sells some good "grade 9, 180Kpsi" bolts, as does grainger. And dont forget about CAT fasteners, they are grade 8 (true grade 8) but they have a few in the 180k PSI range too ( the asterisk denotes the higher grade bolts on the Catalog) but they are far and few for the right lengths.

      Grip length is very important. I had to buy some expensive bolts for the center pivot and cut off the extra threads just to have the correct grip length. And yeah, I searched high and low for some NAS type bolts. They arent worth the money IMO. You are talking the diff in price of 115 bucks for one bolt (yeah, that much) and having to buy two bolts at 20 bucks. And the 20 dollar bolts are some really nice pieces. Here are some links.. JR

      Fastenal
      http://www.fastenal.com/web/products...u=20753&ucst=t

      Grainger
      http://www.grainger.com/Grainger/wwg...e&CatPage=2486

      CAT hardware, great bolts!! Great price..
      http://www.cat.com/cda/files/87031/7/hardwre.pdf

    20. #20
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      Thanks for all the info. I am actually a mechanical engineer and work a second job part time now at a hardware store in san diego, called marshalls industrial hardware. i worked there all through school, total of 4.5yrs now. WE have all the 180ksi fasteners. Socket head cap screws and alot more.

      just to let you know we can ship anywhere and prices are good.

      I really think i will order the center pivot from fays.

      again thanks for the help.

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com