Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3
    1. #1
      Join Date
      Jan 2009
      Location
      Cary Illinois
      Posts
      25

      Tko 500 tunnel issue

      My TKO 500 is very tight up against the top of my tunnel. I have installed a Keisler TKO500 kit into my '67 SS Camaro. I have a Chris Alston front subframe on it so both the folks at Alston's & Keisler were not 100% sure if their trans mount would work. Is there a problem if the trans is tight (slightly touching the tunnel top)? How do you check the angle the motor and tranny are at? What can happen if the angle is not correct?



    2. #2
      Join Date
      Nov 2006
      Posts
      107
      Quote Originally Posted by 67SS View Post
      My TKO 500 is very tight up against the top of my tunnel. I have installed a Keisler TKO500 kit into my '67 SS Camaro. I have a Chris Alston front subframe on it so both the folks at Alston's & Keisler were not 100% sure if their trans mount would work. Is there a problem if the trans is tight (slightly touching the tunnel top)? How do you check the angle the motor and tranny are at? What can happen if the angle is not correct?

      Do you have the Red tower Classic fit or the blue Perfect fit?

    3. #3
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Is there a problem if the trans is tight (slightly touching the tunnel top)?
      Yes. It will rattle, at the least. I would suggest some hammer and dolly work to give yourself a 1/4" clearance, maybe more if you are using OEM rubber engine and tranny mounts.
      How do you check the angle the motor and tranny are at?
      Go to Sears and get their $50 digital level. Measure your engine angle on a machined flat surface on the top of engine, like the valve cover gasket seating surface. Don't use the carburetor mount surface on the intake manifold (if you are using a carb intake). They typically have a 4* angle built in.
      What can happen if the angle is not correct?
      As long as you keep the angles relatively small (6* max), and get your pinion lined up accordingly, not much. The more the back of the engine hangs down (beyond 4*), the more your carb float bowls will be not level. You might find header fitment issues as well, or engine pan or transmission clearance issues. Other than that, the angle doesn't matter all that much.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro


    Advertise on Pro-Touring.com