looking for hoops from subframe horns to firewall

[Chevy]

Looking for tubing to triangulate front subframe back to the firewall in first gen Camaro. Dave P and others here have mentioned them but difficult to find a vendor. Anyone have a source they can recommend?
thanks,
paul

[Chevy]

Dave Pozzi can you answer this? Would like to potentially get them in place before next AutoX event end of the month if possible.

Thanks in advance,
Paul

[69stang]

Autoweld chassis may have what you're looking for.
http://www.autoweldchassis.com/cp.ivnu

[Damn True]

Wow, that page is rough. I looked at quite a lot of it and didn't see anything. Did I miss it?

[Rick Dorion]

I think Jake's Hot Rods can hook you up.

[tumper93]

Check this thread out, saved it for the same reason you are asking and it has a link to a company that has them https://www.pro-touring.com/forum/sh...ad.php?t=43590

[Chevy]

Wow, that page is rough. I looked at quite a lot of it and didn't see anything. Did I miss it?

if it is there, please point it out...

thanks,
Paul

[Chevy]

Check this thread out, saved it for the same reason you are asking and it has a link to a company that has them https://www.pro-touring.com/forum/sh...ad.php?t=43590

Nice thread, i had not found that one in my searches. But still no vendors for first gen?

thanks,
Paul

[tumper93]

On the 8th post is states that they will sell the down bars seperately. I would give them a call and see what they have to say

[silver69camaro]

Or, send us the dimensions and we can bend up pretty much anything you want.

[Turbo67camaro]

Those sound like the bars used on the One Lap Camaro. Maybe James (user=James OLC) had a supplier and can help you, or perhaps that is documented on his website www.onelapcamaro.com.

Mike

[Freddiecougar]

These are the front struts used on Orion, minimal fabrication, and removeable once you are finished. Very clean.
Tim

Let's try this link instead...
http://www.cachassisworks.com/CatPages/CAC/CAC9947.pdf
I'm apparently not smart enough to link to a single page....This opens a portion of the catalog, you need to go to page 55 once it finishes downloading.

[Damn True]

linky no workee

[Freddiecougar]

linky no workee

I fixed it, I believe......
Tim

[nicks67camaro]

ooohhhh i like it

[Chevy]

These are the front struts used on Orion, minimal fabrication, and removeable once you are finished. Very clean.
Tim

Let's try this link instead...
http://www.cachassisworks.com/CatPages/CAC/CAC9947.pdf
I'm apparently not smart enough to link to a single page....This opens a portion of the catalog, you need to go to page 55 once it finishes downloading.

Perfect Tim that is what i was looking for. I will be calling you guys on Monday. BTW, since i have you here...a few months back i think you were running ads in the magazines with subframe connectors for first gen Camaros that were traingulated with a driveshaft safety loop. I searched the catalog but can't find them (i do see them for mustangs). What gives? Do you offer these?

Thanks!
Paul

[XLexusTech]

Tim any pics of the exact fit first gen F body roll cage installed?

[redfire69]

try this: http://www.cachassisworks.com/CatPag...47.pdf#page=12

BTW, do they fit w/stock inner ww's?

[Chevy]

Redfire,
SPoke to Danny at Chassisworks today, ordered the forward struts. Didn't ask about the inner fenders, but he did say they would fit with stock brake booster. I will post up here my results. They have to bend them up so it'll be a week or two before i see them and possibly another before i install them.

Thanks everyone for opinions and help tracking the product down!

Paul

[redfire69]

Great, thanks! I really like the removable design. Ron