Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 3 1 2 3 LastLast
    Results 1 to 20 of 49
    1. #1
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791

      Hydraulic roller cam and head questions.

      My engine builder is trying to sell me a top end kit for $2,100. It consists of a hydraulic roller cam and lifters, and PBR aluminum heads with 2.02 valves and 200cc intake runners. He says PBR is a chinese casting similar to dart. Im wondering if id be better off buying some world heads or brodix heads. i found brodix heads for 1400 and world for $1000. How much is a hydraulic roller set up go for? He says $800. But i looked up just the lifters and i saw some for 400. He said the lifters alone were 550. Just trying to do this build cheaper than what he would do it for.

      thanks
      Jesse
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    2. #2
      Join Date
      Dec 2006
      Location
      Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
      Posts
      1,753
      Country Flag: United States
      OK, you engine builder convinces you to no rebuild your core (and we never found out why it wasn't worth rebuilding) and sold you a core he had in stock. Now he's trying sell you something you're not exactly comfortable with.

      Now he may be good, but it sounds like he wants to build what he wants to build, not necessarily what you want.

      Talk to a bunch of people, get sure of what you want and why, then talk to him. talk a buddy, so you can play good cop/bad cop, have the buddy challenge everything your builder is saying, so you come out convinced that you either want what he wants to sell you or convinced you don't.

      Don't let him direct you, or you'll end with what he wants to sell you, not necessarily what you want.
      Greg Fast
      (yes, the last name is spelled correctly)

      1970 Camaro RS Clone
      1984 el Camino
      1973 MGB vintage E/Prod race car
      (Soon to be an SCCA H/Prod limited prep)

    3. #3
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      He said i could rebuild it but for the cost to bore it, hot tank it, cut the crank i didnt wanna pay that much for that particular motor. so i bought the 383. I just feel weird putting heads on my car that i never heard of before. and im trying to track down parts and prices that may be cheaper then buying through him.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    4. #4
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by CamaroJesse View Post
      My engine builder is trying to sell me a top end kit for $2,100. It consists of a hydraulic roller cam and lifters, and PBR aluminum heads with 2.02 valves and 200cc intake runners. He says PBR is a chinese casting similar to dart. Im wondering if id be better off buying some world heads or brodix heads. i found brodix heads for 1400 and world for $1000. How much is a hydraulic roller set up go for? He says $800. But i looked up just the lifters and i saw some for 400. He said the lifters alone were 550. Just trying to do this build cheaper than what he would do it for.

      thanks
      Jesse
      Without brand names, it's hard to tell. CompCam, Crower, Lunati and Edelbrock retrofit hydraulic rollers are all in the $460-$520 range for a set, so $800 for a full setup including cam, springs and lifters is a smoking deal if its all brand name stuff. I'd avoid off brand retrofit hydraulic rollers becuase you don't want them coming apart on you, only bad things happen.

      Why don't you ask your engine builder for a full estimate of what he wants to use, including brand names and part numbers, and post it up? For example, given a choice of off brand aluminum heads and well known iron heads, I'd think seriously about the iron heads. On the other hand if he's a good engine builder, local and stands behind his work, maybe you use the heads he recommends. The engine needs to work as a unit - CR, cam specs, head flow, bottom end durability and so on. Get the full specs and you'll get better answers here.

      You also need to think about your budget and how you want to use the car. I had just as much fun driving my 9.5:1, CompCams XE-268 cammed, Vortec headed, carbed 350 on the street as I do my 11:1, Lunati hydraulic roller cammed, Dart Pro 1 headed, EFI 383. One's faster than the other, both are fast.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    5. #5
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      Well here is what hes offering me. for $1500 i get the pbr heads with springs, hydraulic flat tappet cam, roller rockers, air gap intake, valve covers, and timing chain. So right there he says 450 horse and the motor would be at a total of 3,000. this includes assembly. hes cutting me a break on assembly because he knows im broke.

      To upgrade to to hydraulic roller the new price comes to $2,100. He said he could port the heads so they would flow from the out of the box 270cfm to 290cfm for $400. He said these heads really are fine for a street car. He says with the ported heads and roller id be around 500 horse.

      This guy is very good. I do trust his work. Maybe i just need more opinions on doing these heads or not.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    6. #6
      Join Date
      Aug 2008
      Posts
      67
      I would stay away from no name heads-could work great- might not-A good cheap head is the E rpm but I like A bit stronger head on a 383
      800 is about right for a hyd roller cam+lifters-AND WORTH IT.
      With some searching you can beat that price.
      If the guy stands behind his work-The price is nice.

    7. #7
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      Just got off the phone with my builder. they are PBM heads not pbr like i previously stated. He said that there wont be much benefit to go to a afr or brodix. He did say that the PBM's really could use porting because they come with a little more boogers inside then more expensive heads. The cam would be from Erson. the roller rockers would be a 1.5 ratio and also from erson.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    8. #8
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    9. #9
      Join Date
      Aug 2005
      Location
      Patterson, NY
      Posts
      784
      Just me, but I wouldn't buy the Chinese heads, for a few reasons.
      First, they are Chinese. The Chinese don't come up with new stuff, they copy existing stuff and make it cheaper. Even if the product is copyrighted, trademarked, patented, whatever, they will copy it and sell it for less. Buy American.
      Next, your engine guy already mentioned they will need some work to clean them up. I wouldn't trust the Chinese quality control, so even after that work is done you could have bad parts. In the short run I think American parts will be more cost effective. In the longer run they definitely will be.
      If you need more reasons I can rant about the Chinese some more. . .

    10. #10
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      Yeah i asked my engine guy about the heads. He has used them alot. He said they will be just fine. I asked if it was worth it to buy more expensive heads and he said no. I do trust this guy becasue of his great reputation. We'll see what happens.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    11. #11
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      Jesse- I'd stay clear of the chinese heads too, if not on principle, the quality of the casting, machine work, and raw material could be suspect. Plus if you ever go to sell the motor it makes it worth a lot less.

      How much more is it going to run to get a set of something better quality like an Edelbrock ($1100/pr) + intake ($250?) + cam/lifters. It think it would be worth the piece of mind to wait a bit if needed to save up the couple hundred bucks IMO. Or maybe you can find a good set of used AFR/Brodix/Edelbrocks for the same $ as the chinese heads?
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible


    12. #12
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793
      I would suggest the Edelbrock E-tec heads with a hyd roller cam. VERY good flowing heads at all areas and VERY cheap for what you get.
      DO NOT use a flat-tappet cam, with the current oil blends they are a time bomb. Yes you can use additives and special oils, but is it worth it when you could just do the roller and have a more optimum grind anyways?
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett

    13. #13
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    14. #14
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      i found some other forums that talked about these heads. they said that they definetly need porting when you get them but once they are ported they are fine. They said only machine shops can get these heads. they are casted in china and built in australia.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    15. #15
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      Then i found some other forums with guys bashing the hell out of these heads. they are very cheap. maybe not a good thing.

      http://www.head-up-performance.com/DartPBMHeads.html

      what are some good heads for under maybe $1,200?

      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)


    16. #16
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      Quote Originally Posted by CamaroJesse View Post
      Then i found some other forums with guys bashing the hell out of these heads. they are very cheap. maybe not a good thing.

      http://www.head-up-performance.com/DartPBMHeads.html

      what are some good heads for under maybe $1,200?
      Isn't google a wonderful thing!

      Edelbrocks baby! One of the few mfg's not to inflate the flow #'s. There valve job work is usually pretty good too.

      (i.e. AFR, I know, I flowed mine and had to do rework, called there bluff, 'oh, well, those flow #'s were with different valves, and uhm, a little more work done)
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible


    17. #17
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      Heres some other options i looked up.

      world motown 220. 220 intake runners and 2.08 valves. $999.50. those might be a bit much for a street motor though.

      brodix race rite. 200cc 67cc chambers. 2.05 valves. $1,400

      afr 195cc 2.05 valves and 67 or 75 chambers $1500

      afr 210cc 2.08 valves and 67 or 75 chambers $1500

      i told my engine guy about these and hes down for doing it but he knows im on a budget so thats y he recomends the PBM's.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    18. #18
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible


    19. #19
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791
      those are so cheap! but they are good heads? ive never liked edelbrock just because ive never liked there carbs. but if they are good then they are a possibility.
      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)

    20. #20
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Quote Originally Posted by CamaroJesse View Post
      those are so cheap! but they are good heads? ive never liked edelbrock just because ive never liked there carbs. but if they are good then they are a possibility.
      That's a per head price - $1,200 a pair.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    Page 1 of 3 1 2 3 LastLast



    Advertise on Pro-Touring.com