Results 1 to 19 of 19
Hybrid View
-
09-03-2022 #1
Registered User
- Join Date
- Apr 2015
- Posts
- 95
Any chance the caliper pistons seized when overheated? Are you able to see the pistons/pads moving the the pedal is pressed?
-
09-03-2022 #2
Registered User
- Join Date
- Aug 2022
- Location
- SoCal
- Posts
- 69
That was my thought. But I replaced both front calipers. No change. I also pulled those new calipers off the rotors and made sure the pistons moved - they do. I've even pulled the pins out and left them on the rotors to make sure nothing was binding along those pins. No change.
Originally Posted by NorCal-SS
I'm bumping the 1" bore master to a 1.125" bore. I can't find anything specific wrong here, so I'm hoping its just that the MC bore is undersized for those big front pistons plus actual disc brake pistons out back rather than the original small wheel cylinders. Not holding my breath on that one, but worth a shot.
Reply With Quote
