Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 24
    1. #1
      Join Date
      Sep 2018
      Posts
      10

      Chassis and supension

      Hi I'm getting ready to start a 68 Camaro build and I'm looking for some suggestions for my chassis and suspension. However to give you a general idea of the car it will be a daily-driver/autocross car with about 650-700 hp.

    2. #2
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States

      Simple

      ridetech.com
      speedtech.com
      Lee Abel
      AFTERMARKET PERFORMANCE

      1977 Chevy Monza 2+2:Project "Cheap Trick"
      1978 C10 Long bed , On air and trailer puller
      2006 Buell Blast ,Just a bike to ride and for mileage
      1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"

    3. #3
      Join Date
      May 2014
      Posts
      52
      Country Flag: United States
      I would also consider the Roadster Shops full chassis, for the price and what you get its really hard to beat. http://roadstershop.com/product/full...-spec-chassis/

    4. #4
      Join Date
      Sep 2005
      Posts
      49,371
      Country Flag: United States
      BMR Torque Arm ( Bolt In Kit), Tubular A-Arms, ViKing Coilovers






    5. #5
      Join Date
      Jul 2018
      Posts
      440
      I'll be going with the TCI torque arm kit for my '68 https://totalcostinvolved.com/produc...ro-torque-arm/

    6. #6
      Join Date
      Oct 2004
      Location
      IL/TN
      Posts
      908
      Country Flag: United States
      Lets start with what do you want to do with the car?
      What is your budget?
      https://www.protouringf-body.com "doing what they say can't be done"

    7. #7
      Join Date
      Sep 2018
      Posts
      10
      Budget 125,000-150,000 and I'm looking for something i can drive daily however go to an autocross event and compete.

    8. #8
      Join Date
      Nov 2016
      Location
      Sulphur, La
      Posts
      613
      Contracting the work out or doing it yourself?

    9. #9
      Join Date
      Sep 2018
      Posts
      10
      Quote Originally Posted by CSG View Post
      Contracting the work out or doing it yourself?
      Contracting out there some very good shops in my area who can do it for my budget.

      - - - Updated - - -

      Quote Originally Posted by 79T/Aman View Post
      Lets start with what do you want to do with the car?
      What is your budget?
      Budget 125,000-150,000 and I'm looking for something i can drive daily however go to an autocross event and compete

    10. #10
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States
      Honestly, for that budget, for ride and handling take hard look at the ridetech full on shockwave stetup with 4 link and also do the wheel well mods to get bigger wheels and TruTurn to allow bigger wheels/tires up front.
      Also with that setup it would ride/drive awesome and autocross well.
      My friend just picked up a set of rushforth wheels and they were spectacular. His czr has tons of carbonfiber parts, and we did actually swap in LSx as his SBC _as bought at great profit (had 454 sbc/4l80e) as in he made .ike $20k profit selling the combo. And just picked up a 2018 ZR1 blown engine and a 2017 6speed trans for like $14kwith all electronics done ready to swap into something..Now his brother is pushingvto pull lower and turbo it but he likes whine he says.
      Where are you located for thzt matter as then we might re ommend someone close.

      Lee Abel
      AFTERMARKET PERFORMANCE

      1977 Chevy Monza 2+2:Project "Cheap Trick"
      1978 C10 Long bed , On air and trailer puller
      2006 Buell Blast ,Just a bike to ride and for mileage
      1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"


    11. #11
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Detroit speed for everything
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    12. #12
      Join Date
      Sep 2011
      Location
      Southern Ontario
      Posts
      640
      Country Flag: Canada
      I enjoyed reading the development thread of the Sniper front sub frame so I would suggest looking at No-limit engineering as well.

    13. #13
      Join Date
      Sep 2018
      Posts
      10
      Quote Originally Posted by monzaracer View Post
      honestly, for that budget, for ride and handling take hard look at the ridetech full on shockwave stetup with 4 link and also do the wheel well mods to get bigger wheels and truturn to allow bigger wheels/tires up front.
      Also with that setup it would ride/drive awesome and autocross well.
      My friend just picked up a set of rushforth wheels and they were spectacular. His czr has tons of carbonfiber parts, and we did actually swap in lsx as his sbc _as bought at great profit (had 454 sbc/4l80e) as in he made .ike $20k profit selling the combo. And just picked up a 2018 zr1 blown engine and a 2017 6speed trans for like $14kwith all electronics done ready to swap into something..now his brother is pushingvto pull lower and turbo it but he likes whine he says.
      Where are you located for thzt matter as then we might re ommend someone close.
      charlotte,nc

    14. #14
      Join Date
      Nov 2016
      Location
      Sulphur, La
      Posts
      613
      After doing research I went with Detroit Speed for my street car build. There is certainly other stuff out there that is good but I felt most comfortable with this.

    15. #15
      Join Date
      Aug 2010
      Location
      now In Dandridge, Tn.
      Posts
      1,301
      Country Flag: United States
      Buy my 68. Body is very solid and straight, not perfect, but a great start. No Limit Sniper IFS, ridetech shocks, TBM brakes, splined bars, Offset 3-link rear, Moser HD 9" floater w/ TBM brakes, billit case True-trac diff, rear suspension is on rockers, so coil-overs and sway bar are in the trunk. Fitted and welded subframe connectors, side rail stiffeners, 6 pt cage, DSE mini tubs and rail kit. Front inner fenders widened 1 3/4". Custom alum fuel tank and plumbing for EFI, balance bar brake/clutch system (currently has auto) ForgeLines set up for 315 square. With your budget, buy this car, drive it until you choose the shop/build design, go directly to body fit and interior upgrades. Be finished a year sooner with a better car. done.
      Attached Images Attached Images        

    16. #16
      Join Date
      Jun 2012
      Location
      South Lyon, MI
      Posts
      1,244
      Country Flag: United States
      I would go with the No Limit Engineering sniper IFS (http://nolimit.net/products#!/No-Lim...egory=13101095) or the Speedway Motors G-Comp system (www.speedwaymotors.com)

      The Sniper IFS is a clean sheet design that is well thought out, not just a modification of the stock system. I must say it is my favorite from an engineering perspective.

      The G-Comp system is on the Goodguy's Autocross winning Camaro built by Speedway Motors. It performs very well. I have had opportunity to spend time with the Speedway Motors team and get a close look at their cars. This stuff is well sorted out and very much race bred, but streetable.

      All the other recommendations above are good. Each system has strengths and weaknesses. Do your homework.

      I would seriously consider Rob's offer above. You'll be on the street faster than any other option with a car that is already sorted out. Rob builds great stuff. His craftsmanship is top notch.

    17. #17
      Join Date
      Nov 2016
      Location
      Sulphur, La
      Posts
      613
      I would be calling Rob if I was you. If his price is fair then that would be a great start and like he mentioned you could have a car to your liking in a much quicker time frame.

    18. #18
      Join Date
      Jun 2012
      Location
      Chicago burbs
      Posts
      247
      Country Flag: United States
      OMG Rob, your camaro reads and looks like a wet dream! Offset 3 link and 315's squared...oh man. I have a budget of $12.50 to 15.00...can we deal lol?

      Sorry, it's been a long day at work and seeing that pic in the grass with the widened fenders makes me want to start my 442 alllll over again.

      1969 442 6.0L LQ9 T56
      Fab9 w/ custom 3 Link conversion
      FAYS2 Watts link
      Thanks to Mark at SC&C for his honesty and passion for the sport, and Ron Sutton for the wealth of knowledge that has helped shape so many of the cars on this site.

    19. #19
      Join Date
      Apr 2006
      Location
      Huntington Beach, CA
      Posts
      2,420
      Country Flag: United States
      In that budget range I'd strongly encourage you to use an aftermarket subframe. I've had a lot of success with my TCI Engineering subframe and torque arm.
      Please Subscribe to the AutoXandTrack YouTube Channel

      Autocross and track blog about running autocross and track events with pro touring cars

    20. #20
      Join Date
      Oct 2006
      Location
      Pittsburgh Pa.
      Posts
      651
      Country Flag: United States
      I would start from scratch with a modern sub...

    Page 1 of 2 1 2 LastLast


    Tags for this Thread


    Advertise on Pro-Touring.com