Results 1 to 5 of 5
Thread: C6 UCA mounting angle
Hybrid View
-
12-19-2016 #1
Registered User
- Join Date
- Mar 2008
- Location
- Chicago suburbs
- Posts
- 667
Would you want to reference the chassis or ground? What are you trying to do?
-
12-19-2016 #2
Registered User
- Join Date
- Dec 2016
- Location
- Norway
- Posts
- 2
To the chassis please.
Originally Posted by another69
This winter I'll install a C6 front suspension on a Ford F100 frame. I'm trying to do it without buying a front clip from the US (which would be the easy way). The freight to Norway is almost just as much as the clip it self... I already have the knuckle arms, hubs, control arms etc. Originally Posted by another69
12-21-2016 #3
Registered User
- Join Date
- Mar 2008
- Location
- Chicago suburbs
- Posts
- 667
I think there may be many other angles to consider then just the "side view". If you can get dimensions from a Corvette, that may be your best bet. Anything can be done with enough time & patience, just make sure you have all points considered before making any welds. That being said I'd love to see you pull it off
Reply With Quote
