Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 19 of 19
    1. #1
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States

      good starter welder...info needed

      I looked in the fab forum, but wanted to open it up. I have a Harbor Frieght, Mig, flux and its a 220.. I have welded some with it.. not the greatest.. but I have read online(makes me an expert LOL) that using gas is better... less contamination. So, Im looking to upgrade.. or should I?? I have ample 220 in the garage, Money I want to spend less than a $1000, and I want to get good at welding..I watch some of the project post, and Im super jealous, the fab folks can do.... dont mind the time or energy, just want to make sure I have the right equipment..

    2. #2
      Join Date
      Aug 2004
      Location
      Los Angeles
      Posts
      592
      Country Flag: United States
      What model number is your welder? I thought all the 220v welders were gas capable.

      Gas sure does make a much cleaner weld, almost no spatter, it is a bit more fussy with any type of air movement such as a fan or open doors on a windy day.
      The rule is measure twice and cut once. My problem is I still measure with a mic and cut with an axe!

    3. #3
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States
      I will get the model when I get home.. Im think its capable.. I just didnt see anything in the paper work...

      Quote Originally Posted by Protour_Pinto View Post
      What model number is your welder? I thought all the 220v welders were gas capable.

      Gas sure does make a much cleaner weld, almost no spatter, it is a bit more fussy with any type of air movement such as a fan or open doors on a windy day.

    4. #4
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States

      good starter welder...info needed

      The unit you have can be used with gas and would have better welds.. I have a Northern Tool 140a 110v mig and it welds pretty nice for a $350, 8-year old unit lol.

      You can get a pretty decent mig for $1k though

      -Dale
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more

    5. #5
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States
      Thanks... when I get home I will take pics.. might need some help on where to get regulator and what kind..

      Quote Originally Posted by Schwartz Performance View Post
      The unit you have can be used with gas and would have better welds.. I have a Northern Tool 140a 110v mig and it welds pretty nice for a $350, 8-year old unit lol.

      You can get a pretty decent mig for $1k though

      -Dale

    6. #6
      Join Date
      Apr 2005
      Location
      MA
      Posts
      39
      Country Flag: United States
      I bought the Northern Tool 230v Klutch multipurpose welder about a year ago and have to say it has been fantastic. I needed to weld some aluminum and having that ability sure was nice! The optional tig torch isn't too great, but does work once you get the power setting right. One of the reviews is mine on there, it has nearly 5 stars for good reason.
      Steve
      1968 Camaro

    7. #7
      Join Date
      Jan 2013
      Location
      Abbotsford, B.C.
      Posts
      297
      Country Flag: Canada
      Eastwood makes a good little mig, I've had mine for 5 years and it works great. Price is great and the consumables are compatible with Lincoln parts.

      Welded in my 4-link and front clip in with no hassles

    8. #8
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States

    9. #9
      Join Date
      Aug 2007
      Location
      Jonesboro, Arkansas
      Posts
      2,506
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      take a welding class
      LOL... but true! I've got a Hobart 140, 110 volt. It came as a flux core unit, but that sucked and bought the gas parts and now welding is great with it. But as Rod stated, either take a welding class or do a lot of practice. You'll get it.

      Carl Wilson
      1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.

    10. #10
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States





      Ive been watching tons of videos, I think its the gas that I need...LOL, I said I need gas...ask my wife, thats not a problem

    11. #11
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States
      Quote Originally Posted by Rod View Post
      take a welding class
      ROD!!!!! Hey Hey Hey, taking a class is tough, I work during the day, and no one around me offers a night class or weekends..

    12. #12
      Join Date
      Oct 2004
      Posts
      419
      Yes, get some gas hooked up and you will see a huge difference. Don't forget to change to solid wire when you add gas.

    13. #13
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by qnitro View Post
      ROD!!!!! Hey Hey Hey, taking a class is tough, I work during the day, and no one around me offers a night class or weekends..

      Kevin I wasn't being a smart A S S, just stating it is a big help with any welder you use, so without gas on that welder its best to remove the gas shielding cup on the gun
      I have a few welders and I also have a very inexpensive harbor Freight one




      Step one..remove the cone from the welding gun...the cone is to control gas flow and direction. ..you're not using gas ..so chuck the cone..this will allow you to get closer to the weld and help you feed the wire more accurately



      Step two....slow down the wire about a .5 less than you usually weld with the cone...



      Here is a sample....ready to weld



      Welded..you still get splatter. .but being closer does reduce it



      Flux cleaned off with a hand wire brush



      Close up of weld....looks good right? This an $89 welder from Harbor Freight that I bought 10 years ago.




      hope that helps

    14. #14
      Join Date
      Aug 2007
      Location
      Jonesboro, Arkansas
      Posts
      2,506
      Country Flag: United States
      One thing you've got to do!!!! after you change to gas, reverse the polarity on your gun and ground! After I changed mine to gas I didn't know to do this. Welding sucked at best. Someone on here asked if I had changed the polarity and I said no, Changed it, welded like the dickens.. If no one around you can give you lessons look to youtube. If you have a college or tech school close they might offer a welding course at night. Just a thought.

      Carl Wilson
      1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.

    15. #15
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States
      wow, thats great... Yeah, Im gonna try it... So Rod, I moved to Texas, do you and the wife miss Cali?? I know we dont..

      Quote Originally Posted by Rod View Post
      Kevin I wasn't being a smart A S S, just stating it is a big help with any welder you use, so without gas on that welder its best to remove the gas shielding cup on the gun
      I have a few welders and I also have a very inexpensive harbor Freight one




      Step one..remove the cone from the welding gun...the cone is to control gas flow and direction. ..you're not using gas ..so chuck the cone..this will allow you to get closer to the weld and help you feed the wire more accurately



      Step two....slow down the wire about a .5 less than you usually weld with the cone...



      Here is a sample....ready to weld



      Welded..you still get splatter. .but being closer does reduce it





      Flux cleaned off with a hand wire brush



      Close up of weld....looks good right? This an $89 welder from Harbor Freight that I bought 10 years ago.




      hope that helps


    16. #16
      Join Date
      Nov 2008
      Location
      Lawrenceburg, TN
      Posts
      4,098
      Country Flag: United States
      Quote Originally Posted by qnitro View Post
      wow, thats great... Yeah, Im gonna try it... So Rod, I moved to Texas, do you and the wife miss Cali?? I know we dont..
      not even a little bit! I love Nashville, we have so much to do and enjoy

    17. #17
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States
      OK so I dont recommend removing the gas cup for flux core but cutting one back to protect the cup threads.
      Several things to remember, smaller size wire for lower amperage and thinner wire. Polarity is also crutial. Also making sure with gas you use 75/25 mix.
      Also keeping your extension cord short and heavy enough gauge.
      Also picking up a good copper clamp and heavy ground cable.
      Also balling up some loose bare copper wire under the ground helps the connection.
      If you use flux core splatter guard and proper polarity makes better finish job.
      Also keeping a small notebook around for recording settings and tricks you used for different jobs helps.
      Also learning if your welder likes push or pull welding and practicing both ways.Certain materials will require different techniques.
      www.weldingtipandtricks.com is great site to search out how and what to use/buy/practice and Jody sure gives good advice.
      I have mig welded for years and some of the best practice was when I started at a Midas shop that did lots of exhaust and also knowing how to gas weld exhaust from before was helpful.
      I have my small Thermal Arc scratch tig and I really need to also pick up a bigger unit to gain AC for aluminum welding. My tig technique is very sloppy as of right now but my Mig is pretty good, I am even getting good at welding old exhaust at a butt.
      The shop I am in right now has small Lincoln and large lincoln and small one is a tad underpowered.
      But if you have 220 welder just add on a gas kit buy a bottle and got to welding, also when using gas you will find that a small amount of stick out on the tip helps in seeing the work, and helps weld quality, go check out Jodys recommendations over on wedlingtipsandtricks
      Lee Abel
      AFTERMARKET PERFORMANCE

      1977 Chevy Monza 2+2:Project "Cheap Trick"
      1978 C10 Long bed , On air and trailer puller
      2006 Buell Blast ,Just a bike to ride and for mileage
      1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"

    18. #18
      Join Date
      Jan 2006
      Location
      Cornettsville, ky
      Posts
      899
      Country Flag: United States
      Quote Originally Posted by Schwartz Performance View Post
      The unit you have can be used with gas and would have better welds.. I have a Northern Tool 140a 110v mig and it welds pretty nice for a $350, 8-year old unit lol.

      You can get a pretty decent mig for $1k though

      -Dale
      what I have. they are made by century or at least mine is.

    19. #19
      Join Date
      Aug 2007
      Posts
      1,239
      Country Flag: United States
      Thanks for the info...

      Quote Originally Posted by MonzaRacer View Post
      OK so I dont recommend removing the gas cup for flux core but cutting one back to protect the cup threads.
      Several things to remember, smaller size wire for lower amperage and thinner wire. Polarity is also crutial. Also making sure with gas you use 75/25 mix.
      Also keeping your extension cord short and heavy enough gauge.
      Also picking up a good copper clamp and heavy ground cable.
      Also balling up some loose bare copper wire under the ground helps the connection.
      If you use flux core splatter guard and proper polarity makes better finish job.
      Also keeping a small notebook around for recording settings and tricks you used for different jobs helps.
      Also learning if your welder likes push or pull welding and practicing both ways.Certain materials will require different techniques.
      www.weldingtipandtricks.com is great site to search out how and what to use/buy/practice and Jody sure gives good advice.
      I have mig welded for years and some of the best practice was when I started at a Midas shop that did lots of exhaust and also knowing how to gas weld exhaust from before was helpful.
      I have my small Thermal Arc scratch tig and I really need to also pick up a bigger unit to gain AC for aluminum welding. My tig technique is very sloppy as of right now but my Mig is pretty good, I am even getting good at welding old exhaust at a butt.
      The shop I am in right now has small Lincoln and large lincoln and small one is a tad underpowered.
      But if you have 220 welder just add on a gas kit buy a bottle and got to welding, also when using gas you will find that a small amount of stick out on the tip helps in seeing the work, and helps weld quality, go check out Jodys recommendations over on wedlingtipsandtricks




    Advertise on Pro-Touring.com