Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Apr 2016
      Location
      langhorne pa
      Posts
      2
      Country Flag: United States

      BMR subframe connectors

      I know im beating a dead horse here but heres the question,
      I have a 69 camaro that has a verry stout 355 (500+hp) I want to get a set of subframe connectors
      Heres the problem,
      The car already has Hoskis lowering springs front and rear it sits very low (25 inches to the wheel opening in the rear) , the front subframe is about 4 1/2 inches from the ground I dont want to use or cant use any that hang below the floor board and dont want to cut the floor either the only choice is BMR bolt in connectors. Any other suggestions?Has anyone had any problems installing or using them? Ill be using them with CalTracks



    2. #2
      Join Date
      Jul 2013
      Location
      San Fernando Valley
      Posts
      182
      Country Flag: United States
      I've got them and really like them. I'll try to get some side shots so you can see how they are on the car. I don't think they hang low.

    3. #3
      Join Date
      Apr 2016
      Location
      langhorne pa
      Posts
      2
      Country Flag: United States
      Hey Tom do you have bolt in connectors? Did you have to modify them for the fuel and brake lines?

    4. #4
      Join Date
      Jul 2013
      Location
      San Fernando Valley
      Posts
      182
      Country Flag: United States
      Yes they are the bolt in connectors.
      I ran new fuel and brake lines, so they weren't there when I bolted in the sub frame connectors.
      I'm pretty sure you will have to tweak the brake line and probably the same with the fuel line. I ran braided fuel line so that wasn't an issue.

    5. #5
      Join Date
      Dec 2011
      Location
      Elverson, PA
      Posts
      185
      Country Flag: United States
      Quote Originally Posted by slamin69 View Post
      I know im beating a dead horse here but heres the question,
      I have a 69 camaro that has a verry stout 355 (500+hp) I want to get a set of subframe connectors
      Heres the problem,
      The car already has Hoskis lowering springs front and rear it sits very low (25 inches to the wheel opening in the rear) , the front subframe is about 4 1/2 inches from the ground I dont want to use or cant use any that hang below the floor board and dont want to cut the floor either the only choice is BMR bolt in connectors. Any other suggestions?Has anyone had any problems installing or using them? Ill be using them with CalTracks
      Have them on mine and they work great.

    6. #6
      Join Date
      May 2015
      Location
      Island Lake, IL
      Posts
      816
      Country Flag: United States
      Personally, I would install solid body mounts prior to subframe connectors if you haven't already. Hotchkis subframe connectors are pretty low profile if you're into looking at those as well. The BMR torque arm kit would also be great for tying the rear end to the subframe through the use of links.

    7. #7
      Join Date
      Sep 2005
      Posts
      49,371
      Country Flag: United States
      We sell 95% of our Connectors in the Bolt-On Style. Yes, you have to play with the Lines!

    8. #8
      Join Date
      Jul 2013
      Location
      San Fernando Valley
      Posts
      182
      Country Flag: United States
      I looked under my car last night and the BMR subframe connector hangs about 1-1/2" below the body pinch weld.
      I hope that helps.




    Advertise on Pro-Touring.com