DSE control arms vs Summit control arms

[Rod]

DSE has that much in just the materials. Nothing but quality.

Tim

Tim is correct! the import arms dont have delrin bushings there just white plastic and crack easily..... and the ball joints are INCREDIBLY cheap, I tested a set when I worked for the speed shop the lower ball joint was at a fail point (it literally clunked when I tilted the arms back and forth) when within 30 days and the upper was VERY loose and woobly...they had been on the car for daily driving and two auto-crosses (one autoX at marina California and one Goodguys event)...

at the very least if your going to use them change to a good ball joint top and bottom and inspect them often

I cant help but think if the bushings and ball joints were so bad there might be issues with the welding or steel

I bead blasted the test set and found no visual cracks in the welds or steel