Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 43

    Thread: I.R.S. Camaro

    Hybrid View

    1. #1
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,877
      Country Flag: United States
      Quote Originally Posted by Crestronwizard View Post
      Does anyone have a set of wheels they want to sell? I don't want to wait 6 weeks to get a custom set. Thanks
      Is the car minitubbed? The backspacing is not the normal backspacing for a minitubbed first gen because the rear end is stock width.

      Don

      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside


    2. #2
      Join Date
      Dec 2010
      Location
      Apex, NC
      Posts
      1,020
      Country Flag: United States
      Quote Originally Posted by dhutton View Post
      Is the car minitubbed? The backspacing is not the normal backspacing for a minitubbed first gen because the rear end is stock width.

      Don
      Yes

    3. #3
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,877
      Country Flag: United States
      Quote Originally Posted by Crestronwizard View Post
      Yes
      Then it gets tricky because you want 12 inch wheels with roughly 8 inches of back spacing. Not too many guys running anything like that on this site. I ordered Forgelines for my AME IRS. Be careful if you go with 18 inch wheels, there are limitations on how much back spacing you can run. I went with 19 for that reason.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside




    Advertise on Pro-Touring.com