Results 21 to 35 of 35
Thread: 69 GTO Build
-
08-19-2020 #21
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Cleaned up and painted the rear end.
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
-
12-17-2020 #22
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Mocked up the tires last night for brake clearance then mounted the rubber today.
18x8s up front with 245/40s
18x10s out back with 295/35s.'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
12-17-2020 #23
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,978
Making progress!
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
01-30-2021 #24
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Back on the ground. Need to bring the front up a bit but overall loving the stance! The rear will drop with the settling of the springs and a tank of gas so the gap will disappear
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
01-31-2021 #25
Registered User
- Join Date
- Jan 2008
- Posts
- 116
That will cost more than 4 sets of headers (custom header shield company mentioned earlier), header wrap is easy, cheap and it works. I tried Swain White Lightning coating, what a waste of money.
Nice build and thank you for not putting an LS1 in it, those old Pontiac engines sound glorious.
Mike86 Buick GN, Stage 2 V6, Twin EFR Turbos
01-31-2021 #26
Registered User
- Join Date
- Jul 2013
- Location
- N. Scottsdale
- Posts
- 380
I had a set of headers made for my 70 Firebird...builder did a good job keeping everything away from the engine mounts so hopefully I won’t have to wrap them.
01-31-2021 #27
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Headers on Pontiac engine are just overall a pain in the ass. Took the ones off that came with the original car went with the manifolds and won't be going back to headers.
Originally Posted by Alponcho
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
01-31-2021 #28
Registered User
- Join Date
- Jul 2013
- Location
- N. Scottsdale
- Posts
- 380
Agree. But I’m running an IA2, and the last time I tried, RA manifolds wouldn’t fit (interfere with freeze plug area IIRC). Originally Posted by Wacker7977
06-01-2021 #29
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
More progress and got her fired up tonight. Sounds rowdy with no mufflers or exhaust.
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
10-26-2021 #30
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
She's driving now and got the fenders hung just need to button some things up and hopefully driving this weekend!
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
10-26-2021 #31
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,978
Always an exciting time! Looking good.
1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
11-01-2021 #32
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Was surprised with it running and driving this weekend.
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
11-01-2021 #33
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Got her all washed up today.
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
11-01-2021 #34
Registered User
- Join Date
- Jun 2012
- Location
- N. Shore, Ma
- Posts
- 337
Lookin good, hope to be driving mine soon too!
Eric
Building 1969 GTO - Roadster Shop chassis, LQ9 w LS3 heads and rebuild parts from TSP, Bowler prepped Magnum T56 6 spd, 3 Link Strange 9" w Speedway Floater Hubs, Wilwood 14" F - 13" R brakes, 275.18 - 345.19
https://www.pro-touring.com/threads/94970-69-GTO-Build
11-14-2021 #35
Registered User
- Join Date
- Dec 2014
- Location
- Rhome,TX
- Posts
- 65
Went out for a small cruise last night. Definitely need to bring the front up a little bit.
'72 Lemans
468 Stroker; Aluminum KRE D-Ports ported by CVMS (10.2 comp); XR288HR Comp Cam; Port Matched Performer RPM; Quick Fuel Carb; Doug Long Tube Headers, 2.5 exhaust with H-pipe and Flowmasters; TH-400 w/11" 2800 stall; 9" Rear w/Eaton TruTrac Diff and 3.50 gears.
Reply With Quote
