Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 11 of 11

    Threaded View

    1. #7
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      My engine is set back solely for the purpose of increasing steering rack to harmonic damper clearance. The rack had to be moved to reslove bumpsteer issues with the ARDF clip, so the engine went up 1/2" and as far back as the distributor would allow. End result:
      -Accessing transmission bellhousing bolts is a major pain in the arse.
      -Offset base air cleaner was required to clear the cowl hood opening.
      -Transmission dipstick had to be "modified"

      Other than that, don't do it unless you must. Biggest problem will be locating under-dash components if you go back in a big way. The Gale Banks Camaro made use of a formed steel wheelbarrow to simplify fabrication.
      /Steevo

      http://www.bankspower.com/camaro-FirewallCowlMod.cfm

      ________________
      Steve Chryssos





    Advertise on Pro-Touring.com