Mini Tubs

[daredvl22]

I would say 7-10 hours. I did mine myself, and if I were doing it again (after doing it once), and the inner and outer tubs weren't installed, that's what I would guess,.....maybe less. A professional shop could probably do it in a little less time, I would imagine. If you want to run 345's, you need to "stretch" the tubs, and roll the inner lip of the quarter a little. It can be done, but to do it correctly, it requires some time with a hammer/spool and dolly.

I'm running PS2's - 325/45 on 19's, and I'm pretty sure I can make the 345's fit. Once I burn these up I'll try.

It's not that hard, Good luck!