Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Aug 2004
      Location
      Ortonville, Michigan
      Posts
      320
      Country Flag: United States

      Heads for 302 chevy

      What do you guys think would be a good cylinder head to use for a 1969 302 sbc with a stock spec short block.
      11.5:1 compression
      .485/.485 and 254/254 @.050 cam



      Billy


    2. #2
      dennis68 Guest
      don't overlook the Vortec design heads. I've seen build ups with Edlebrocks E200 that made over 500HP with a mild cam. I beleive those heads run about 1200/set ready to bolt on.

    3. #3
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745

      Well

      Do you want to extort it's zillion RPM capability, or do you want to try to inject some low end torque into it? Z28s will turn some Rs, We have had some with the off road cam, a little porting and headers that would turn north of 7500 no problem. however, you had to slide the clutch to launch it even with 3.73s.
      Considering you cubes and cam, I would look for something in the 180cc range. I am not brand specific on little heads.

    4. #4
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793

      heads

      I would be looking at the AFR 195. They are pretty much the only heads out there that will flow the numbers you need to complement that cam, and still maintain good velocity down low in the RPM range
      You will need to have those angle milled down to 64cc if you want to maintain that high of a compression ratio.
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett

    5. #5
      Join Date
      Aug 2004
      Location
      Ortonville, Michigan
      Posts
      320
      Country Flag: United States
      Thanks for the replies. I now have some ideas to go kick around.

      [Do you want to extort it's zillion RPM capability]

      Yes! I also have an offroad cam, but I'm not sure if i'm going to use it or not. How does it compare with the stock one in street driving?
      Thanks

      Billy

    6. #6
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745

      Zillion RPMs

      If you have an off road cam and want to rev it, and do not care about grunt, i like the AFR 195s also.
      The off road cam is fine on the street. But then again, your talking to a guy that runs a 271/279@50, .682 lift on the street, in a small block.

    7. #7
      Join Date
      Aug 2004
      Posts
      8
      Plenty of AFR Heads in stock, includes 195cc. Here's a link that will give you some more details of what's in stock:

      http://www.ClassicChevyHeads.com




    Advertise on Pro-Touring.com