Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Nov 2011
      Posts
      8
      Country Flag: United States

      Drop Spindle+Tall Ball Joint clearance issues?

      I have a 1987 Buick Regal G-Body. I'll be doing some front suspension work this spring and I'm trying to figure out what my current options are with stock A-arms. The rear of my car is lowered two inches so I plan on getting the front at least level with that. The coilovers I'm using have adjustable height but I wanted to use drop spindles and install them with taller ball joints.



      -Will drop spindles with at least one taller ball joint on each side cause any clearance issues within a stock 15 inch wheel?
      ---Can I replace both the upper and lower ball joints with taller ones and still have clearance within the wheel?
      ------Will the upper A-arms now have clearance issues of their own in regards to the wheel well or anything in the engine bay? (I'll be using a Buick V8 which will at some point have headers.)
      ------Is this overkill? Will it cause too much negative camber or reduce the available amount of suspension travel too much? (I'm using an aftermarket front sway bar and the spring rate on the coilovers will be 550lbs but I still intend to use the car on the street with the shocks on low settings.)
      ------OR will having taller ball joints on both the top and bottom positions actually negate the effects of changing them in the first place?

      -Can anyone recommend a trustworthy 2 inch drop spindle that can be used for aggressive driving (other than the AFX spindle which I'm under the impression that I'll need new front brakes for?)


    2. #2
      Join Date
      Sep 2010
      Location
      corona,ca.
      Posts
      1,132
      Country Flag: United States
      talk with mark at scandc.com he can tell you better than anybody.
      72 chevelle.

    3. #3
      Join Date
      Oct 2011
      Location
      Philipsburg, Pa
      Posts
      528
      Country Flag: United States
      Here's the lower UMI arm with 1/2" taller ball joint. You can see what GP means when he says a factory lower arm lip may rub the brake rotor. I've heard of the "folding" the arm lip before.

      Name:  1FC39057-A475-4CF3-87DC-BABAA3E69B43-8608-0000064A61CDE2F8_zps2e3ebbf0.jpg
Views: 1507
Size:  65.5 KB

      The upper UMI arm with 1/2" taller ball joint gets a little close to the tire at FULL DROOP but is about 1/2" away at normal ride height.

      Name:  C7CBB90B-6A6F-4E7A-A88F-3478F9DF75AA-8608-0000064A5BDB9CA0_zpsdee7ba87.jpg
Views: 1841
Size:  69.4 KB

      We'll be looking at some 17" wheel and tire combos next.
      Technical Support
      UMI Performance, Inc.
      [email protected]
      814.343.6315

      Join us on Facebook!

    4. #4
      Join Date
      Mar 2010
      Location
      Okinawa, Japan
      Posts
      305
      Country Flag: United States
      The drop spindles push the rotor (and of course wheel) out about 1/2" so I would be more concerned with your outer wheel well clearance. I'm running stock lower control arms with taller upper and lower ball joints without issue, but also upgraded to C5 brakes and bigger wheels.

      I know one thing to really watch is tierod clearance with anyhting less than 18s and more than 4 1/2 backspacing, but as long as you are sticking with stock wheels you should be fine.
      81 Regal, impersonating a Grand National with a 488 Olds
      Build thread: https://www.pro-touring.com/showthre...ith-a-488-Olds




    Advertise on Pro-Touring.com