69 steering box Q

[shmoov69]

My stock power steering box is leaking now and it may be a good time to get a good one. What should I go for that won't break the bank and has the exact same demensions of the stocker? Because my headers are built around the stock box.
Thanks!

[Z06vet]

Iroc box should work well I would think. If its dimensions are not exeact they have to be pretty close.

[DEIGuy38]

Search here or Lat-g for jeep grand cherokee box. This is what my brother in law did on his 69 and he likes it

[MonzaRacer]

Better yet give Lee Manufacturing a call at 818-768-0371. Well worth the cash.

[rchaskin]

Better yet give Lee Manufacturing a call at 818-768-0371. Well worth the cash.

.....What he said. That is what I did.
I sent them my new pitman arm and they installed it for free to boot.

[77thor]

I did the IROC gear box upgrade on my 69 Camaro and both boxes were the same size.

I believe that AGR boxes are also the same size as stockers.

[MonzaRacer]

I did the IROC gear box upgrade on my 69 Camaro and both boxes were the same size.

I believe that AGR boxes are also the same size as stockers.

Only issue is some have issues with AGR and other "named" brands. I have never heard of a Lee box NOT at least being taken care of (did her one guy had janked pump relief and Lee fixed blown seal for free) figure about $500ish , but give him a call first. Tell him what your doing he can point you in right direction. I am gonna do both my Monza and my Caprice evenually. Since I have had "store bought" before, I tend to like talking to the right person first,,, THAT would be Lee MFG.
Just sayin'. Oh and that and $1.99 gets you a liter of 'Dew here too.

[slugo10]

I did the IROC box in my 69 Camaro and best thing I have done so far. Cheap too just read this link.

http://69camaro.nextmill.net/steering.html

[shmoov69]

Thanks guys. I'll give Lee a call then. It has to be an EXACT fit with the turbo headers.
Any idea what I gotta spend?

[MCB Matt]

We are now a dealer for Lee if i can be of help

Matt

[gammapunk]

Like several comments on here call Tom Lee. I would ask him about rebuilding yours. They can change the ratio if you want them to. Also go ahead and have your pump rebuilt/valved if it is the original one while you are at it.

[PhillipM]

Know that if you go to the newer 600 series the ports are about 3/8" more towards the splined end. If your like me. That makes a difference. I was able to make it work still but it's pretty tight.

[rchaskin]

Thanks guys. I'll give Lee a call then. It has to be an EXACT fit with the turbo headers.
Any idea what I gotta spend?

Mine was $440.
They rebuild / re-ratio for $400.

I am in NC, so i just got the new one.